When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Nick here from Mishimoto! I just wanted to drop off some info on our fresh new 350Z/G35 direct fit catch can kit! Make sure you head over to our Engineering Blog to get the full scoop!
The VQ35 has had a long tenure as Nissan and Infiniti's heavy hitting V6 engine, and while robust, it's not immune to the effects of blow-by. We set off to create a kit for these vehicles to put a stop to any more potential carbon buildup on the intake tract.
Our first challenge was finding a place to mount our new kit in the tightly packed engine engine bays of the the G and the Z, but our engineer was able to come up with a creative solution.
Make sure that you head over to our Engineering Blog to find out how we mounted our tall can, how much blow-by we were able to collect, and a link to our discounted presale!
Feel free to shoot me any comments, questions or concerns you might have!
Love that there is a still an aftermarket producing quality of life improvements for these cars.
This looks like a well thought out addition. Good job!
So what happens the pcv line on the back of the driver side head?
We also ran a 1000 mile test with a can in line with that part of the PCV system as well, and we weren't able to catch any blow-by on that side.
Originally Posted by DarkZ03
Looks nice, I have the ARC one though, now if you could only make a power steering reservoir and coolant surge tank. Those Id buy in a heartbeat =)
As of now we don't have any plans for those, but I can definitely pass your suggestion along to the right people!
Originally Posted by toogood131
Do you sell just the bracket?
Unfortunately we only sell the kit as a complete set
Also, for those of you who haven't seen, we do have a presale going for this kit already! Make sure you get in on it quick, because it's going to be a short one!
We also ran a 1000 mile test with a can in line with that part of the PCV system as well, and we weren't able to catch any blow-by on that side.
As of now we don't have any plans for those, but I can definitely pass your suggestion along to the right people!
Unfortunately we only sell the kit as a complete set
Also, for those of you who haven't seen, we do have a presale going for this kit already! Make sure you get in on it quick, because it's going to be a short one!
Ok cool, believe me there would be market for such things, the only ones available for these cars are the WR ones and the fitment isn't the greatest, from what I can tell your parts are pretty good quality so I'm sure they would sell.
I probably just missed it (I tend to do that) but how do you drain it?
Originally Posted by onevq35de
I use a straw with mines. Taste isn't bad at all.
But actually, to drain it youjust need to unscrew the bottom of the can and dispose of it when you change your oil. We also offer a drain kit in the case that you want to simplify it even more
Originally Posted by DarkZ03
Ok cool, believe me there would be market for such things, the only ones available for these cars are the WR ones and the fitment isn't the greatest, from what I can tell your parts are pretty good quality so I'm sure they would sell.
Much appreciated!
Just a reminder, we're planning on releasing these today, so make sure you get your order in if you're still debating it!
My little diy ditty. Baffled mishi catch can's bracket attached to another bracket attached to the power steering bracket in my 4 door Z. It works though it does not catch it all which I believe is a good thing.
We actually had a 350 in on Wednesday with the HR motor to test fit our 370 kit on, but unfortunately the mounting points and the hose routing doesn't quite match up. We don't currently have plans for an HR kit, but I've already passed on the interest to our market research team so we can hopefully start looking into that.
Originally Posted by DEATHBLOW
How about us twin turbo guys?
Which kit are you running? And is this a DE engine? It gets a little tricky to design our products around the huge amount of other aftermarket products out there, but we do our best to work around these though.
Just going off photos of the Jim Wolf kit, it looks like the passenger side cold-side intercooler pipe is cutting it a little close to the power steering reservoir, and we move the tank over about 15mm toward the PS of the car with our bracket, so you might want to take some measurements and see if it will work. We also typically put a check valve on our kits being installed on turbo applications, if you can make ours work, I can give you a recommendation on which one to install!
Originally Posted by monkey7
No more deal?
I'll shoot you a PM!
Also, I wanted to let you guys know that we have officially released this catch can kit! Thanks to everyone here who followed along with the development of this product and for the presale orders!
Those of you who did order, we'll be packing these up and shipping them out ASAP!
Thanks for the input I'm currently having some upgrades install so once i get it back I can take some measurements. The motor is a DE and I'm running the JWT 800bb kit with a larger charge pipe. Here is a pic so you can see what I'm talking about.
06-19-2018, 05:14 AM
Mishimoto VQ35DE Direct Fit Catch Can R&D
