Doper760

I'm new to the forums so bear with me. I have a 2008 z33 and I recently noticed that the car idles kinda wierd. The rpms drop every once in a while, this led me to investigate and discover its being caused by a leak in the pcv system. The pcv system has a little black box, that connects to my intake, it has a crack in it and the hose that connects to my intake is completely off. I am very sure that this is the cause of my weird idle as my car has no other problems. I dont know the name of said box, however I do know that it's part of the pcv system and is circled in red above. I'm in need of the driver-side box and if you could help me find someone who's selling it or let me know where to buy it I'd greatly appreciate it. 😀

Doper760

Found a close up of the exact part I need. Hope someone can help!😁

iideadeyeii

iTrader: (6)

It is just a box for the 3 hoses or is there something special inside of it?? Go to home depot and get a large T barb fitting if it's just a splitter.

SilverGLE

iTrader: (3)

Wow... I'm looking for the exact same part, just for the driver side! I suspect the box is a T, my plan will be to pop it off and inspect, and probably just grab a T barb.

Would love to put a name to it...

Doper760

We should name it "The Great Value Tupperware T Barb that likes to take a crap on us by making us buy a whole new intake" If someone could shorten that down I'd greatly appreciate it. Silver, did you find out if it indeed was a simple T?

SilverGLE

iTrader: (3)

I haven't had a chance to take mine off, yet, but likely will by the end of the weekend.

franknstn

I have one you can have if you paypal me the cost to ship. lol.

SilverGLE

iTrader: (3)

I wasn't able to remove mine with all the other things I had going on this past weekend... Let me look at mine, first, to see exactly what it is and I'll let you know.

Doper760

Update: I ended up fixing my T-valve with some apoxy and electrical tape, went right on the car with no problems and it seems to have fixed my lazy idle situation. Thank you for your help!

SilverGLE

iTrader: (3)

FYI for those finding this thread in the future...

Finally had the chance to remove mine. It's literally just a junction box from what I could see with a flashlight peering in the ports.