TCZOC Official Off Topic Thread
#82
Its does not matter where the sub is placed. I have the under strut enclosure with two jl 10w6v2 subs and I rattle damn near everything if I turn it up. I had to remove the bottom plate on in the passenger side glove box because the air these subs push kept blowing it out and making a very annoying rattle. Im going to have to add dynamat every where one of these days. And maybe a cf hatch with the plexi window.
#85
Registered User
iTrader: (5)
Join Date: Jan 2005
Location: Vero Beach, FL
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
heres all the info on them
Infinity Kappa 63.9i
3-way 6-1/2" speakers (pair)
2-ohm impedance for extra power (compatible with all factory or aftermarket car stereos)
Plus One® woven-glass-fiber woofer cone with hi-roll rubber surround
1" edge-driven M.M.D.® dome tweeter
edge-driven UHF (ultra-high frequency) super-tweeter
computer-optimized outboard crossover with tweeter level control
direct-connect crossover dongle
power range: 2-75 watts RMS (225 watts peak power)
frequency response: 45-30,000 Hz
sensitivity: 95 dB
top-mount depth: 2-5/16"
Infinity Kappa 60.9cs (Components)
power range: 2-90 watts RMS (270 watts peak power)
frequency response: 45-35,000 Hz
sensitivity: 93 dB
woofer top-mount depth: 2-7/16"
6-1/2" two-way component system with outboard crossover and I-mount tweeter mounting kit including Startfish OEM adapter
Edge-driven UHF dome tweeter
2-way external crossover network with tweeter level adjustment
direct-connect crossover dongle
Infinity Kappa 63.9i
3-way 6-1/2" speakers (pair)
2-ohm impedance for extra power (compatible with all factory or aftermarket car stereos)
Plus One® woven-glass-fiber woofer cone with hi-roll rubber surround
1" edge-driven M.M.D.® dome tweeter
edge-driven UHF (ultra-high frequency) super-tweeter
computer-optimized outboard crossover with tweeter level control
direct-connect crossover dongle
power range: 2-75 watts RMS (225 watts peak power)
frequency response: 45-30,000 Hz
sensitivity: 95 dB
top-mount depth: 2-5/16"
Infinity Kappa 60.9cs (Components)
power range: 2-90 watts RMS (270 watts peak power)
frequency response: 45-35,000 Hz
sensitivity: 93 dB
woofer top-mount depth: 2-7/16"
6-1/2" two-way component system with outboard crossover and I-mount tweeter mounting kit including Startfish OEM adapter
Edge-driven UHF dome tweeter
2-way external crossover network with tweeter level adjustment
direct-connect crossover dongle
#88
Looks like you'll need a amp that runs around 95 watts rms per channel at 14.5 volts. The tricky part with elemental designs is their power ratings are at 12.5v. Once the car is running those amps put out more power. You could probably find a decent kenwood 4 channel amp for pretty cheap.
#89
Registered User
iTrader: (5)
Join Date: Jan 2005
Location: Vero Beach, FL
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
Looks like you'll need a amp that runs around 95 watts rms per channel at 14.5 volts. The tricky part with elemental designs is their power ratings are at 12.5v. Once the car is running those amps put out more power. You could probably find a decent kenwood 4 channel amp for pretty cheap.
#92
Registered User
iTrader: (1)
Join Date: Nov 2007
Location: Boynton Beach, FL
Posts: 1,202
Likes: 0
Received 0 Likes
on
0 Posts
They shipped out.... I looked up the ETA on delivery and there is no date listed.... I also have to wait on the STI lens too.... I am going to email the guy and find out whats up....