Dynos - Injen CAIs and Stillen HFCs - Not Safe For HR Owners :-)
#101
Registered User
iTrader: (20)
Join Date: Sep 2007
Location: SoCal 818
Posts: 1,699
Likes: 0
Received 0 Likes
on
0 Posts
I got it back from z-car garage over the new years. They took it to the muffler shop to have all the flanges welded on in place of the slip-joints. Z-car garage also made some mod to the HFC to stop the rasp (not sure what they did). It actually worked, once the exhaust warmed up - sounded awesome, but it lost like 4 HP. I said I'd trade 4hp for awesome sound, but Rob wants to try some stuff to see if we can keep all the power with zero rasp. I told him to go for it. I have other cars to drive while they play with mine.
He also asked if they can display it in their booth for the week at the San Jose Auto Show and I agreed. So maybe by the end of next week I'll get it back again.
Not sure what to do with the rasp. The power is awesome though. Can't wait to do a dyno tune.
Infinite and A.H; do you guys have the 1st gen bassani or the 2nd gen bassani? I think the 2nd gen bassani's have visible resonators inside the Exhaust tips. There may have been enough of a change to the 2nd gen Bassani that it has no rasp with HFC's or TP's- this is just speculation on my part.
He also asked if they can display it in their booth for the week at the San Jose Auto Show and I agreed. So maybe by the end of next week I'll get it back again.
Not sure what to do with the rasp. The power is awesome though. Can't wait to do a dyno tune.
Infinite and A.H; do you guys have the 1st gen bassani or the 2nd gen bassani? I think the 2nd gen bassani's have visible resonators inside the Exhaust tips. There may have been enough of a change to the 2nd gen Bassani that it has no rasp with HFC's or TP's- this is just speculation on my part.
#111
Registered User
Thread Starter
iTrader: (11)
Join Date: Apr 2006
Location: SF South Bay area
Posts: 1,145
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, you'll need to remove the bumper.
#112
Registered User
Thread Starter
iTrader: (11)
Join Date: Apr 2006
Location: SF South Bay area
Posts: 1,145
Likes: 0
Received 0 Likes
on
0 Posts
Rasp is history!!! Rob @ z-car garage tweaked my exhaust to get a really nice, evil low-tone with zero rasp once it is warmed up. I dunno exactly what he did, but it worked. It cost me about 5 hp and 3.5 tq, but I'll make that trade any day. I am now at 292 WHP and 257 WTQ. It just sounded bad before - and now, I cen;t get ehough of it.
Rob had my car for a week or so in the shop to do some testing with different parts (I have other cars to drive). He is going to make his own HFC's and is determined to get all of the flow of the Stillen HFC, but none of the rasp. Can't wait to try it. Not sure when it'll be ready though.
The car has been feeling stronger and stronger as I drive it though. If that's possible.
For now, loving the sound and power. Really, it's a big difference over stock. Definitely pulls harder in each gear. Traction in 1st is becoming an issue if the pavement is not warm. I have to be very careful in 2nd gear going around a sweeping corner - The rear end really likes to come out!
I think it's getting faster every time I drive it - if that's possible.
I am bugging the crap out of Rob - talking about tuning every time I see him
I wanna see 310 WHP at least and 270 WTQ!!! - we'll see.
Rob had my car for a week or so in the shop to do some testing with different parts (I have other cars to drive). He is going to make his own HFC's and is determined to get all of the flow of the Stillen HFC, but none of the rasp. Can't wait to try it. Not sure when it'll be ready though.
The car has been feeling stronger and stronger as I drive it though. If that's possible.
For now, loving the sound and power. Really, it's a big difference over stock. Definitely pulls harder in each gear. Traction in 1st is becoming an issue if the pavement is not warm. I have to be very careful in 2nd gear going around a sweeping corner - The rear end really likes to come out!
I think it's getting faster every time I drive it - if that's possible.
I am bugging the crap out of Rob - talking about tuning every time I see him
I wanna see 310 WHP at least and 270 WTQ!!! - we'll see.
Last edited by hiz-n-herz; 01-18-2009 at 10:19 PM.
#113
Registered User
Thread Starter
iTrader: (11)
Join Date: Apr 2006
Location: SF South Bay area
Posts: 1,145
Likes: 0
Received 0 Likes
on
0 Posts
Yet still we have the worst air quality!!! I Effing hate Cali for their emissions laws - you can't even legally install a cleaner-running engine if it's not the engine that came in your car from the factory! If it was not for CARB BS (It's a racket!), I would TT my car this summer. The only way to get any real power increase in Cali is to buy a new car - what BS.
As it is, Nissan has nothing in between the 330 HP 370z (Which is not enough of an upgrade from the 350z to warrant my trade) and the 480 HP GTR. Nissan is missing a big step in their line-up. There's too big of disparity between a $40k 332 HP car and an $85k 480 HP car. What if I am willing to spend more $$ on a 400 HP sports car? I have to shop a different manufacturer... Just sayin. (Hmm a used C6 Z06 can be had for ~$50k - If I could get over the interior)
For now though, thankfully, z Car Garage is here to help me get my speed fix in the HRZ - until I decide what my next move is.
I'll ask Santa for a 4.5l, 400HP V8 in the Z34. That's what I really want!
As it is, Nissan has nothing in between the 330 HP 370z (Which is not enough of an upgrade from the 350z to warrant my trade) and the 480 HP GTR. Nissan is missing a big step in their line-up. There's too big of disparity between a $40k 332 HP car and an $85k 480 HP car. What if I am willing to spend more $$ on a 400 HP sports car? I have to shop a different manufacturer... Just sayin. (Hmm a used C6 Z06 can be had for ~$50k - If I could get over the interior)
For now though, thankfully, z Car Garage is here to help me get my speed fix in the HRZ - until I decide what my next move is.
I'll ask Santa for a 4.5l, 400HP V8 in the Z34. That's what I really want!
Last edited by hiz-n-herz; 01-18-2009 at 10:21 PM.
#114
Registered User
Thread Starter
iTrader: (11)
Join Date: Apr 2006
Location: SF South Bay area
Posts: 1,145
Likes: 0
Received 0 Likes
on
0 Posts
I'll take it down to see what it is.
MUST... HAVE... TUNE... NOW! LOL :-)
#115
Registered User
Join Date: Dec 2008
Location: michigan
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
#117
Registered User
Thread Starter
iTrader: (11)
Join Date: Apr 2006
Location: SF South Bay area
Posts: 1,145
Likes: 0
Received 0 Likes
on
0 Posts
I dunno if it's from the intakes. Could be the HFCs. could just be the combo of the intakes, HFC's and Exhaust is just leaning out the mixture too much. It could be a hundred other things too. I'll have more info later today.
#118
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (35)
I have a feeling it might be the Cats, You might need to stuff the tube with some brillow wire stuff (hit me up I have a whole bag of the none powder having kind).
It definitely is leaning, you need a tune with the setup you have. Like I said on Saturday, I plan on going to TechnoSaquare in March after I get all my stuff installed. If Rob can tune by then I will try him first (since its close by) but if not I will take the 6 hour drive to Torrance.
Thanks for the ride BTW. Huge difference from stock