SE5spd

iTrader: (17)

How do you like RE11? I want to try RE11A when they come out.

SE5spd

iTrader: (17)

Weird my 285/35/18 rubbed until I rolled the fenders.

Bmurray350z

iTrader: (34)

strange

SE5spd

iTrader: (17)

I have +15 though.

Jcope

The new wheels look so much better!

jrose89

Please don't say search lol because I've tried, and I'm just really not sure.

I wanted to ask for my specific specs to make sure before I have these shipped.

I have a 350z.

I'm buying 18x10+0 / 18x12+0.

Does anyone know approximately what needs done to make these fit? I know I need my fenders rolled. Will they need pulled? Approximately how much camber will I need to run?

Any help is appreciated.

terrasmak

iTrader: (8)

Lots of camber, lots of stretch, many extra parts and it will have the HellaGay look

KingBaby

iTrader: (3)

+0 is you fender line somewhat so your wheels are gonna be two inches further out than that.

they're other websites better suited for this

TehkMob

iTrader: (23)

It will work with a roll and slight pull, you will be able to run neg 2 camber or less if someone good does your roll.

Bmurray350z

iTrader: (34)

Just wanted to say no rubbing at all so far with 275/40/18 on 18x10.5 +20 lowered on tanabe gf210 springs with stock camber.

mr. sparco

iTrader: (13)

Check the aggressive wheel/stretched tire thread, if your car is daily driven and you want your tires to last, probably not the specs to go with.

Edit: Unless you're not slamming your car, it will look uggg.

VMRWheels

With enough work that could fit. Just depends on how much fender work you're planning on doing, tire size, alignment, etc.

Winstunna_

I have a set of staggered XXR 006's
The fronts are 18x8.5
and the rears are 18x9.5 with +35 offset all around

I'm having trouble with what size tires I should get, I want less wheel gap than stock and my car is not lowered YET. I plan on lowering my car 1 inch when I get the money.

I was thinking of going 245/60 up front and 275/65 in the back
this may be wrong lol but help is appreciated!

KingBaby

iTrader: (3)

you doing it wrong continue searching!

275/35 is what I'd do

Winstunna_

275 in the front or back? and don't I need a "taller" size tire?

ZS14RR

iTrader: (30)

Better offset wheels will help. If you are on a budget look for spacers. About 20mils.

Are you even lowered?

The Z is not a SUV with those sidewalls you mentioned lol

jerseystyle

iTrader: (22)

Plan on going off-road?

Moved to correct forum.

Winstunna_

I already said i'm not too familiar with tire specs lol
so can you guys tell me what you would recommend?

Not trying to spend any money on anything but tires.

jerseystyle

iTrader: (22)

http://www.ehow.com/how_2364482_read-tire-sizes.html

KingBaby

iTrader: (3)

275/35R18 Front
275/35R19 Rear

Look into 20mm front and 25 mm spacers rear. Also a slight roll in the rear...

The above is the safest suggestion, next to selling those wheels.