OFFSETS, axis, racing sparco's.....????
 

Im going fuggin nuts over ordering new wheels. I presently have HP evo's:
19 x 8.5 front +38 offset
19 x 9.5 rear +38 offset.
http://img133.echo.cx/img133/4486/35...12888882qj.jpg
I want to get one of the following sets of wheels:
option 1: Axis Hiro's
19 x 8.5 front
19 x 9.5 rear
i dont know what the offsets are for these wheels, and could there be different offsets ? someone please let me know whats the best offset to get.
http://img119.echo.cx/img119/8930/r47zu.jpg



option 2:
http://img133.echo.cx/img133/2815/sparco31ay.jpg


Racing sparco D type, stage 2 :
19 x 9.5 rear +22 offset
19 x 8.5 front + 22 offset
how would these offsets compare to a +38 ??

I dont understand the offset bullsh!t !!!! im sick of it !!!!!!!!!!!!!!!1
i want my wheels to be more or less flush with the fender or a little inside the fender, My evos are too far in the fender (offset sux ***)......

The Hiros run a 25 offset in the rear, which will put the wheel 1/2 inch closer to the fender.

The DS2's run a 22 offset which will be closer to 5/8ths closer. :)

Those Racing Sparco rims look great. Im not familiar with them but can someone tell me how much they tend to weigh and if they're quality rims. Also does anyone actualy have them on their Z/G? Thx.

With the 8.5"/9.5" widths, anything from +20 to +25 should provide the look you want. I realize the front is a bad angle, but this should give you an idea what a +22 looks like.

http://autopia.org/gallery/data/500/...olks___010.jpg