Aggressive Wheels and Stretched Tires....Welcome
12-28-2010, 08:06 PM
Here you go.. let me know if you guys have any questions..
Can't see anything when you pop the hood
But....
Under the rubber the cut outs can be seen.. I used a 2" cut out and did it twice.. Make sure your car is up in the air so you don't cut the A-Arm..
Can't see anything when you pop the hood
But....
Under the rubber the cut outs can be seen.. I used a 2" cut out and did it twice.. Make sure your car is up in the air so you don't cut the A-Arm..
12-28-2010, 09:37 PM
New Member
iTrader: (4)
Join Date: Nov 2007
Location: dallas
Posts: 901
Likes: 0
Received 0 Likes
on
0 Posts
Tell me why I am my350zing drunk on my birthday after being out and having work at 6am.
Anyways, I am do used to the a arm hitting that I don't even notice the sounds anymore only when my pAssensget points it out
Anyways, I am do used to the a arm hitting that I don't even notice the sounds anymore only when my pAssensget points it out
12-28-2010, 10:44 PM
Registered User
Join Date: Jul 2010
Location: rancHoe
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Did this on my ef, left me with a nightmare.
Royal, does it really give you that much more travel? Because next would be the arm itself bottoming out. Because i did this on my old civic and all it left me with was a nightmare and maybe 5mm difference in room. So is it really worth it on the z?
Royal, does it really give you that much more travel? Because next would be the arm itself bottoming out. Because i did this on my old civic and all it left me with was a nightmare and maybe 5mm difference in room. So is it really worth it on the z?
12-28-2010, 10:55 PM
Registered User
iTrader: (1)
Join Date: Jan 2009
Location: Austin/San Antonio, Texas
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Did this on my ef, left me with a nightmare.
Royal, does it really give you that much more travel? Because next would be the arm itself bottoming out. Because i did this on my old civic and all it left me with was a nightmare and maybe 5mm difference in room. So is it really worth it on the z?
Royal, does it really give you that much more travel? Because next would be the arm itself bottoming out. Because i did this on my old civic and all it left me with was a nightmare and maybe 5mm difference in room. So is it really worth it on the z?
12-28-2010, 11:28 PM
don't know how it left you with a nightmare, but it has been a dream for me.. before i did this all I could here was knock, knock, knock all the damn time.. being so low with 18's you will not get way from this.. but now I don't here it at all only on really big bumps..
I plan on redoing it with cutting it more and adding some braces during my build so be on the look out for that..
But it worked for me..
I plan on redoing it with cutting it more and adding some braces during my build so be on the look out for that..
But it worked for me..
12-28-2010, 11:55 PM
Like opinions on line matter.
But Powuh, don't try to grow baby nuts on line dude. I really don't want to have to drive up the street to walmart and call you outside and it won't be for cookies like you had asked me for here at my pad.
Do your thing King Baby, Thank you for not letting MY opinion stop you!!
But Powuh, don't try to grow baby nuts on line dude. I really don't want to have to drive up the street to walmart and call you outside and it won't be for cookies like you had asked me for here at my pad.
Do your thing King Baby, Thank you for not letting MY opinion stop you!!
you don't have to , ill pass by your house tomorrow if you wanna square this up. im not one of these online kids and your threats don't scare me.
12-29-2010, 12:14 AM
Registered User
Join Date: Jul 2010
Location: rancHoe
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
don't know how it left you with a nightmare, but it has been a dream for me.. before i did this all I could here was knock, knock, knock all the damn time.. being so low with 18's you will not get way from this.. but now I don't here it at all only on really big bumps..
I plan on redoing it with cutting it more and adding some braces during my build so be on the look out for that..
But it worked for me..
I plan on redoing it with cutting it more and adding some braces during my build so be on the look out for that..
But it worked for me..
Are you ****ing 5? Like really get over it. This is the aggressive fitment thread not the "im a hardass thread". Take it to pm's if you have beef and quit ruining everyones good time.
12-29-2010, 05:39 AM
Registered User
iTrader: (4)
Join Date: Oct 2009
Location: Arlington,Texas
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
12-29-2010, 05:45 AM
Registered User
Simple enough, Thanks!
I have a question, originally the A-Arm would bottom out on the back side of the ball joint. Now with that hole cut, when the arm does bottom out, where does it make contact when it bottoms out?
I'd be worried if it's now contacting in the center of the A-arm.
I have a question, originally the A-Arm would bottom out on the back side of the ball joint. Now with that hole cut, when the arm does bottom out, where does it make contact when it bottoms out?
I'd be worried if it's now contacting in the center of the A-arm.
12-29-2010, 06:13 AM
Registered User
Join Date: Jun 2008
Location: Daytona Beach, FL
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
12-29-2010, 09:27 AM
12-29-2010, 10:15 AM