Unofficial Enkei Wheels Thread
#522
Registered User
Join Date: Nov 2008
Location: Sydney
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
OK, I don't get it - where did I go wrong -was going to mount the new PF01's (with +15, similar to a lot of the RPF01 setups I've seen on this thread)and look how much they stick out from flush -here are shots or rear 10.5 +15
front
rim sizes are 9.5 front and 10.5 rear +15 on all four. Isn't this size and spec similar to mosrt oif the RPF01s on this thread - and they don't appear to stick out anywhere near to what are doing. Obviously have to have these exchanged, very disappointing day.
iffest, and before tires got mounted,
front
rim sizes are 9.5 front and 10.5 rear +15 on all four. Isn't this size and spec similar to mosrt oif the RPF01s on this thread - and they don't appear to stick out anywhere near to what are doing. Obviously have to have these exchanged, very disappointing day.
iffest, and before tires got mounted,
Front: 19 x 9 +18
Back: 19 x 10 +22
Stock camber, needed to roll fenders in the rear as it was rubbing. Stock height.
#524
Registered User
iTrader: (19)
Wheels should come in when you drop the car down and it settles, however - fairly aggressive offsets, here is a pic of my enkies with the following offsets:
Front: 19 x 9 +18
Back: 19 x 10 +22
Stock camber, needed to roll fenders in the rear as it was rubbing. Stock height.
Front: 19 x 9 +18
Back: 19 x 10 +22
Stock camber, needed to roll fenders in the rear as it was rubbing. Stock height.
Now, I run the same exact offsets/width without rubbing... but an 18" wheel.
295/35/18 rear
265/35/18 front
a little more average photog pic with a dusty car
Last edited by Zivman; 09-12-2010 at 05:57 AM.
#527
Toasty
iTrader: (4)
OK, I don't get it - where did I go wrong -was going to mount the new PF01's (with +15, similar to a lot of the RPF01 setups I've seen on this thread)and look how much they stick out from flush -here are shots or rear 10.5 +15
rim sizes are 9.5 front and 10.5 rear +15 on all four. Isn't this size and spec similar to mosrt oif the RPF01s on this thread - and they don't appear to stick out anywhere near to what are doing. Obviously have to have these exchanged, very disappointing day.
iffest, and before tires got mounted,
rim sizes are 9.5 front and 10.5 rear +15 on all four. Isn't this size and spec similar to mosrt oif the RPF01s on this thread - and they don't appear to stick out anywhere near to what are doing. Obviously have to have these exchanged, very disappointing day.
iffest, and before tires got mounted,
#528
350Z-holic
iTrader: (46)
Last edited by scotts300; 09-14-2010 at 01:35 PM.
#530
Registered User
iTrader: (3)
Join Date: Mar 2008
Location: santa rosa, TX/Kuwait
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
yes..I had the rpf1 with the same ofsets as the pf01 and once the car is lowered from the jack, it will flush out..dont worry..mine were sticking out like that also when discount tires were trying them out..
#531
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Well off to the shop to mount my RPF1's , kinda suck i have to run mismatched wheels at the time attack this weekend. But after this race time to order some new front 17x9.5 +18 RPF1's to match.
#535
Registered User
Join Date: Jul 2007
Location: Sammamish, WA
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Wheels should come in when you drop the car down and it settles, however - fairly aggressive offsets, here is a pic of my enkies with the following offsets:
Front: 19 x 9 +18
Back: 19 x 10 +22
Stock camber, needed to roll fenders in the rear as it was rubbing. Stock height.
Front: 19 x 9 +18
Back: 19 x 10 +22
Stock camber, needed to roll fenders in the rear as it was rubbing. Stock height.
Thanks
Last edited by cipric76; 09-26-2010 at 03:13 PM.
#537
Registered User
Join Date: Jul 2007
Location: Sammamish, WA
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
TY
#539
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
I should get my matching front wheels this week. Full set of RPF1's for the track and my NT03's for the street.