Axis Hiro 19's on my car.
 

Hi guys, I think I have finally decided on wheat wheels I am getting. I think I am getting Axis Hiro with the Anthracite centers. I am going to get 9.5 255's & 10.5 - 285's. What offset is right for this size? I don't want them sticking out or sitting to far in. A lot of people still seem to be getting it wrong. I don't want to just take the tyre shops word for it either. I went on the Axis site and it just say offset available listed as ANY.

I have read other posts and it say that the offset have a range sometime but I think that is to suit most wheels. Since I am being specific with the make and size off wheel is there a perfect offset?

Thanks :)

You are lucky I'm bored. This Daytona blue is running the same exact wheels and tire sizes you are talking about using.

If you're a member of the site, he has more pics posted.

The Hiro 19x10.5" rears are only avaialbe in a 35 offset. Have no idea why the hell their site doesn't list offsets.

http://www.350zfrenzy.com/forum/showthread.php?t=5665

Wow! 305's on the rear! There are so many different widths and choices! You think it would be set in stone by now! I thought 245 & 305 would be a weird combination? I thought that you would ideally run a 255 & 285 combination?

I just got an email from my local supplier and they are saying the offset is +38 Front and rear. Is that good for a 9.5 & 10.5 combination?

The wheels are not going to be flush with the fender with those offsets. You will need to get spacers to make those wheels flush with the fender.

I don't want spacers! I can't believe they are saying it is the right offset for a 350Z!

Not flush?? Front or rear?

These are my 10.5 Hiros with 305/30's and no spacers.

These ain't flush enough? Had to tweak the fender lip as it was.

See what I mean? This is one of the toughest subjects on our cars. BTW those 305 are MASSIVE!!!

<----- Stands corrected

All good.....................

Damn, that sucks, so what caused that damage? Did you hit a large pothole?

[QUOTE=MRfire]Buy a different wheel.............and I'm one of many and they wouldn't do **** for me:
[QUOTE]

Damn!!!:icon14: :icon14:

Axis is working this out with me now. There was a very isolated "bad batch" about 4 years ago...only about 30 wheels. They use a different factory now, so all should be good. Love the look of the wheels too.

I heard that was a long time ago too...

I have had Hiros for 4 years now, a few months back I noticed one of them had a crack in it, I called axis and within a few days had a new wheel at my door step.

Axis = A+ on the CS end.

My hiros are 18 and 22 offsets.

Jeffies cracked because he takes fat chicks on dates.

:icon18: :icon18: :icon18: :icon18: LMAO!!!

So let me get this straight, Axis was aware of the problem of the quality of their wheels and they fixed it? And if for some reason i crack a wheel, they will replace them free of charge? I really hope they fixed this cuz im saving up for a set of hiros n i want to be sure my wheels are safe lol.

10.5 +35 is a perfect offset if you are going with a 295 or a 305 tire.

What about 10 +26 with a 275?