---

Here are some of our recommended tips regarding wheel care.

* Aluminum alloy wheels are susceptible to corrosion when they are expose to salt or mud. Therefore, wash them with water after driving the vehicle on the beach or on a snowy or unpaved road. The use of soft-cloth is suitable when wiping the wheel.

* Do not use chemicals that include abrasive compounds, strong acids or high alkaline content. To select the right cleaning products, please read their product labels and instruction carefully.

* Using car wash equipment could potentially scratch the wheels. It is the best way to wash by hand. When doing so, be careful with sharp edges, which could be hazardous to your hands.

* When storing these wheels/tires for a extended period of time, protect them from direct sunlight, rain, oil, moisture, humidity and high temperature.

* When storing a tire that is mounted on a wheel, you should only keep 1/2 of the air pressure. When re-installation, always check the tire pressure to the recommended level by the tire manufacture.

* Whenever possible please limit or refrain usage of tire shine products, as we have noticed a correlation between the oxidation of wheel lip surfaces and these products.

As shown in the image above, here are some recommended tips for proper cleaning of our wheels:

Step 1) First, rinse the wheel lightly with water to remove debris and brake dust.

Step 2) Second, use a microfiber or soft towel while using generous amounts of water to clean the surface of the wheel.

Step 3) Third, once the surface is clean, use a microfiber or soft towel to dry the wheel to avoid water spotting. Be careful that you have completely cleaned the surface, otherwise debris could scratch the surface during the drying process.

Step 4) Lastly, if you maintain this washing process on a normal and consistent basis, your wheels will keep its clean appearance.

---

Originally Posted by joem1cha3l (Post 8776791)

price on the VS-XX Xtreme Gold shipped to 12037 please

Originally Posted by joem1cha3l (Post 8778666)

18s without brembo please

Originally Posted by duckJAI (Post 8778811)

Sorry, what's the promotion on WORK Varianza and Schwert Series?

Is it just the free custom colour? let's say if we just want standard colour?

Originally Posted by Q_USAF_G35 (Post 8876554)

I'd like the silver polished model with the deep lip, shipped area code - 95816

19's staggered with maybe 8 or 9 on the front and 10.5 rear

Thanks

Originally Posted by cliffrlp (Post 8876735)

Lemme know if ya want to get rid of those T1S's if you haven't already ;)

Originally Posted by d1mon3k (Post 8880302)

meister s1's in black with more agressive offsets than the +23,+24 to 76137

Originally Posted by 240sxll (Post 8888449)

vs xx 18x 11-4 gold to 20002 just only 2

Originally Posted by lazyduster (Post 8944001)

Can u pm me price on xd9 an info on size an offset

http://www.ravspeconline.com/images/...ft/11RFT-3.jpg
http://www.ravspeconline.com/images/...t/WFT_LOGO.png
WORK Emotion 11R FT (monoblock).
Flow Foaming - Superb Durability, Extra Lightweight, Big caliper Clearance, Built For Track !

The key benefit for flow forming is able to reduce the barrel thickness, thus reducing the weight of the wheel without compromising the strength of the rim barrel. The 11R-FT is a good choice for motorsports racing use or at area where there are smoother roads.

Unlike our competitors' flow forming wheels, WORK flow forming wheels start with low-pressure cast construction, whereas some of our competitors use lower quality gravity casting. Low-pressure cast construction has a denser material property over gravity cast wheels, thus allowing a greater strength advantage over gravity cast with flow-forming barrel.