Blake's350z

The rims i've looked at are 18 x 8.5 front and 18 x 10 back and the factory offset I found are 18 x 8 and 18 x 8.5 and I am worried the rims won't fit with the brembo brakes

mr. sparco

iTrader: (13)

None of those are offsets. Factory is +30 & +33. You posted diameter and width.

Blake's350z

I'm new to my Z so i'm still learning my bad. I just want to know if any deep dish rims would fit with my brembo that are gloss black

terrasmak

iTrader: (8)

Post a link to what wheels you are looking at

Blake's350z

I found these however they are flat black http://www.carid.com/xxr-wheels/521-black-451449.html

terrasmak

iTrader: (8)

http://www.nlmotoring.com/XXR-521-Wh...p/52180142.htm Just order 4 of these and you may need to use a rear spacer depending on the look you want

Blake's350z

I have spacers already so they will fit?

terrasmak

iTrader: (8)

Do you know that they make many different size spacers ? I have 5mm, 10mm and 20mm in my garage. It also depends on you definition of fitting. I would probably run no spacer up front and 15mm in the rear if it were mine.

Blake's350z

I don't know but I can check tomorrow. Any suggestions in size or rim?

terrasmak

iTrader: (8)

What is your budget?

Blake's350z

Preferably around $1,000 to $1,500

mr. sparco

iTrader: (13)

You won't get much dish out of the xxr 521s, the 006 model will have more of a lip even then it won't look anything like what flush crowd runs. If that's the look you're going for.

https://my350z.com/forum/wheels-and-...s-welcome.html
1178 pages of aggressive wheels, mostly with dish/deep lip.

sofa king

iTrader: (25)

There's 2 massive threads that show peoples wheels. Go through every page to get an idea of what will work for you. any wheel can be made gloss black so I wouldn't get hung up on that.

Blake's350z

Thanks guys for the help

Classy

iTrader: (7)

Blake, here is a picture of my old car with the 18x10 +25 wheels you are looking at. I had a 275 up front and a 295 in back. The front rim fits stupid perfect and the rear leaves you room to put in wider tires.

Highway Riding

iTrader: (6)

Interesting... Neva seen those before. Either that I just neva noticed the secondary lip and for around $1500 I would check out VR wheels and see what they had. Using XXR for wheels and good new tires would be like $1200 tops

Classy

iTrader: (7)

I still miss that car

supraturboman

iTrader: (10)

Does anyone here know if the xxr 526 in 18s will clear factory brembo brakes? I've read like 65 pages and am done reading lol
I already have them fyi

Also, anyone know if the varrstoen es2 in +38 will look odd ?

Jokah

Looks good classy. Mine..






SHWING! I like it. Got a couple more mods to do.

Jokah

Dont know man. Try them out. I have 06 brakes and 18x10.5 +20 526, fit great with no spacers. I know i can put a massive spacer in the rear. So the rear WILL clear. If you got the 9" wide fronts you can put a massive spacer there aswell. So it CAN also clear.