When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a set of varrstoen es2 19 x 9.5 front and 19 x 10.5 rear offset of 12. Tire size 245-35-19 and 275-35-19. I am rubbing when ever going over unlevel road or over a bump more so on the back but also the front. Front is rolled. Need the rear rolled. But it seems<br/>like these wheels are way too wide even if i roll the wheel it will still get in contact with the fender? Any suggestion? adjust the camber ? I am on hotchkis springs.
tires sticking outside of fender<br/>
Roll the rear, it's needed and will be good once rolled. The front just need the top fender liner screw removed of trimmed. I typically trim them for customers , simple and easy, if you still slightly rub up front, grab the fender and slightly give it a pull. You can easily pull the front fenders, just use two hands and evenly pull and it will slowly come out.
I agree. Once you are rolled in the rear it doesn't look like you will be rubbing at all. You are already running enough negative camber, so once rolled you are good.
i am getting my fenders roll now in the rear at a custom shop. He state if i roll the wheels i'll still rub..options are roll the fenders and curve the fenders a little at your own risk. 2nd option trim a little from the wheel itself.. or maybe i can adjust my toe in alittle.
i might have to pull the rear out a little for it to work...$100 more..Can cause uneven surface at your own risk, also 40 perfect chance of paint chip..
Hey guys. This is my first Z coming from an S Chassis. I am still trying to figure out the whole wheel fitment thing on the Z33 chassis. I was wondering if 255/35's would fit in the front on a 19x10.5 + 0 Varrstoen ES1 with a super slight pull? Any help would be great, thanks yalllll
Hey guys. This is my first Z coming from an S Chassis. I am still trying to figure out the whole wheel fitment thing on the Z33 chassis. I was wondering if 255/35's would fit in the front on a 19x10.5 + 0 Varrstoen ES1 with a super slight pull? Any help would be great, thanks yalllll
Considering I run a 10.5 +15 up front with a 285/35-18, I'm pretty sure it will fit. You may need to add a hair of extra camber. You will probably want to use camber arms to adjust for the perfect flushness anyhow .
08-09-2016, 08:45 PM
