PSA: When asking "will this rub"....
#24
Registered User
iTrader: (1)
Join Date: Sep 2013
Location: georgia/Maryland
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
will this rub
pretty sure it wont none the less I don't need any surprises during install.
19x10.5 +30ish with 275/45/19 on the rear obviously might be 275/35/19 im deployed so I cant remember exactly off the top of my head.
19x10.5 +30ish with 275/45/19 on the rear obviously might be 275/35/19 im deployed so I cant remember exactly off the top of my head.
#29
Got new wheels put on my 06 z I'm running 18x9.5 +22 all around need help on a good tire size that won't rub currently have tein s techs installed and that's it the tires I have on the wheels now are 255/35r18 I know they are "civic sized" but they will actually fit my subaru just need to get proper fitting tires for the z
#33
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
#35
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
#36
Registered User
Join Date: Dec 2014
Location: Pittsburgh, PA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Looking to buy Rota Torque 18x9.5 +20 for all 4 corners. Everything is original now, stock 350z Touring 18x8 +30's. I read a lot about the Rota's fitting, but calculators show the Rota's sticking out 29mm more than stock rims. Visually, this just looks like a rubbing issue waiting to happen. Appreciate any feedback.
New Setup
-Tire size (Front 255/40/18, Rear 275/40/18)
-18x9.5 +20 (Front and Rear)
-Camber spec (? - Not sure, most likely standard alignment)
-Stock height, not lowered
Thanks
New Setup
-Tire size (Front 255/40/18, Rear 275/40/18)
-18x9.5 +20 (Front and Rear)
-Camber spec (? - Not sure, most likely standard alignment)
-Stock height, not lowered
Thanks
#40
New Member
iTrader: (1)
Join Date: Feb 2013
Location: Virginia
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Will this rub?
Ok so sort-of a multi part question as I figure out what to do here. Goal is performance and looks (mostly performance).
I'm probably looking to lower my car on RS-R shocks in the Spring, but I need new tires soon and I'm looking at either a 285/35/19 or 275/35/19 rear and 265/40/18 front on Nismo rims
So basically:
-Car lowered on RS-R springs, .6" front and rear
-285/35/19 tires in back, 265/40/19 in front
-19x10" +30 rear, 18x9" +30 front wheels
-Camber spec (don't know, but as close to standard as possible I guess)
Will it rub at all (in any situation) AND will VDC be fine with either a 285 or 275/35/19 rear and 265/40/18 front or will one of the above sizes not work?
Thanks!
Thanks!
I'm probably looking to lower my car on RS-R shocks in the Spring, but I need new tires soon and I'm looking at either a 285/35/19 or 275/35/19 rear and 265/40/18 front on Nismo rims
So basically:
-Car lowered on RS-R springs, .6" front and rear
-285/35/19 tires in back, 265/40/19 in front
-19x10" +30 rear, 18x9" +30 front wheels
-Camber spec (don't know, but as close to standard as possible I guess)
Will it rub at all (in any situation) AND will VDC be fine with either a 285 or 275/35/19 rear and 265/40/18 front or will one of the above sizes not work?
Thanks!
Thanks!