Thoughts on JR29?
#1
New Member
Thread Starter
Thoughts on JR29?
First time purchasing wheels, I have stock everything still on my Z, ordering coilovers then wheels,
The specs i found are 18x8.5 5x114.3/120 +30
White or Black, anyone have any experience with them?
The specs i found are 18x8.5 5x114.3/120 +30
White or Black, anyone have any experience with them?
#3
New Member
Thread Starter
#4
pretty spot on.
I have a stock body but working on a widebody atm and i have the 19" infiniti (19x8 +30)F & (19x8.5 +33)R
To make it flush with the stock body i put 25mm spacers in the front and 32mm in the back. Front has no problem, but rears used to rub. I'm not sure if thats something you care about but...
I have a stock body but working on a widebody atm and i have the 19" infiniti (19x8 +30)F & (19x8.5 +33)R
To make it flush with the stock body i put 25mm spacers in the front and 32mm in the back. Front has no problem, but rears used to rub. I'm not sure if thats something you care about but...
#6
350Z/370Z Tech Moderator
MY350Z.COM
MY350Z.COM
Problem I have with these wheels - can find NO specs on them, can find no USA dealer/distributor (everything I can find is in the UK, and not even any listings of them on the lowest common denominator, EBay), and finally, the pricing on them when converted from UK pounds to USD appears to be about $225/wheel which is kind of a telling story.
Guessing these are gravity cast by the dozen wheels that put them in the class of looks before quality/strength. Not a bad thing if you're using the car to go from point A to B and nothing more. Just guessing here but with no source of important manufacturing data and price point, only conclusion one can make. But ask yourself, is it worth buying a set of wheels that nobody sells and supports?
Guessing these are gravity cast by the dozen wheels that put them in the class of looks before quality/strength. Not a bad thing if you're using the car to go from point A to B and nothing more. Just guessing here but with no source of important manufacturing data and price point, only conclusion one can make. But ask yourself, is it worth buying a set of wheels that nobody sells and supports?
Thread
Thread Starter
Forum
Replies
Last Post
md1400cs
Exterior & Interior
14
01-30-2010 03:30 PM