any rubbing? volk LE37T 19's 9.5 +22, 10.5 +38
 

will these rub volk LE37T 19x (f)9.5 +22, (r)10.5 +38? or will i need to do some fender work?

Re: any rubbing? volk LE37T 19's 9.5 +22, 10.5 +38
 

Where did you get these # from? I never see 10.5 +38 before, but I think you should be fine with these offsets. If 10.5 +22 wont rub with stock height, then +38 should not be either.

Whoa! +38 in the rear will bury the wheel. Like HaNkYs_Z said, +22 looks best. Try not to go higher then +29.

sorry for being such a newb, but what size lip do you get with a +22? I tried asking a vendor on this site but the @ss won't respond to my PMs. and then you say to not exceed +29... what size lip does that give? (I can't believe I'm so clueless about wheels... :( )

Every models are different, for LE and TE 19x9.5 +22 you get about one inch lip with concave look and for 19x10.5 +22 you get about 2.5 inches with concave look. Like for my offsets, 19x9.5 +12 I get the same looks and lips as the 19x10.5 +22. But like I said every wheels are different, I only know about LE and TE, b/c I got one. And also the reason why they tell you dont exceed +29 is b/c it will look too tuck in, plus those are the offsets that Volks recommended for Z. Hope this help. So what wheels are you looking for?

I know what you mean.. hope they're not expecting me buying anything from them... :rolleyes:

HaNkYs_Z
what about those :
Work Equip 3Piece forged wheels 19x9 +26mm, 19x10+20mm

I just ordered them and dont know anything about the lip.. what lip should I expect in inches ...
on the picture the lip looked very nice..
thx

On every wheels the lip designed are differently, there is no way that I can tell how big your lips are going to be unless I see it in person or someone else go with the same setup. But for most of those wheels I that saw with 19x10 all got at least 2.5 inches lip, I will expect yours to be about 3 inches in the rear and about 2 inches front, but this is just my guess.