FS: SO CAL 2003 Nissan 350Z Authentic Veilside Widebody Twin Turbo $30,000 OBO
04-27-2017, 07:55 AM
#1
Registered User
Thread Starter
SO CAL 2003 Nissan 350Z Authentic Veilside Widebody Twin Turbo $21,000 OBO
$21,000 OBO
2003 Nissan 350Z Touring Model, MT, Red w/ 33,000 original miles.
Location:
Southern California
VIN: JN1AZ34E53T003385
Contact:
Bryan - fridayonmonday@gmail.com
The engine was refreshed it recently. Have currently 1000 miles since rebuild. Leak down on all cylinders was only about 2%.
Retuned mildly to 400 WHP and 400 FTLBS at 14psi of boost on Superflow roller dyno. 468 WHP on Dynopack. Extremely safe timing, for our awesome CA 91 crap octane. Tuned by Shawn Church.
Cars is exceptionally easy to drive on the street for a car of its caliber. The Veilside body kit is authentic, not a knock off, body kit as you can see was molded in. Color is candy red so has been well taken care of and not left outside to fade. A/C works great. I have the Veilside wing for the buyer, I preferred the car now without because of the sleek side profile.
CHECK OUT THE CAR IN ACTION -
Car was originally in Turbo magazine years ago, have the original publication. Seats have been re-upholstered since then.
No low ballers, everything on this car is real!
ENGINE MODIFICATIONS
ECU/TUNING: Osiris Uprev
BLOCK: Nissan VQ35D, CP Pistons 8.5 to 1 Compression, Carrillo Rods, ACL Race Bearings, ARP Main Studs
HEADS: Factory Heads, Factory Valves, Eibach EVS Valvetrain, ARP Head Bolts
TURBO: Greddy Twin Turbo Kit
INTAKE: Project Import Intake Manifold Kit w/ 5/8 spacer
MANIFOLD/DOWNPIPE/EXHAUST: Helix test pipes, HKS Full Dual Exhaust
FUEL DELIVERY: Walbro 255LPH Fuel Pump, Grams 1000cc Injectors, Z1 Motorsports Fuel Pressure Port
COOLING: Koyo Radiator
COMPONENTS: Project Import Breather Kit
DRIVETRAIN MODIFICATIONS
TRANSMISSION: Factory 350Z - Rebuilt about 5k ago
CLUTCH/FLYWHEEL: McLeod Racing Street Supreme Clutch Kit and Supremacy Aluminum Flywheel
DIFFERENTIAL: Factory 350Z w/ Quaife LSD
SUSPENSION MODIFICATIONS
SHOCKS/COILOVER: Tein Flex Coilovers with EDFC
BRAKE MODIFICATIONS
Brembo GT series big brake kit
WHEELS & TIRES
20″ x 9.5 20″ x 13 Work Miester S1, Hankook Ventus V12
MISC MODIFICATIONS
GAUGES: AEM AFR Gauges, Greddy Boost and EGT Gauge
EXTERIOR: Complete Veilside Version III Body Kit, custom side splitters
INTERIOR: Custom Upholstered Seats by Body Craft OC
2003 Nissan 350Z Touring Model, MT, Red w/ 33,000 original miles.
Location:
Southern California
VIN: JN1AZ34E53T003385
Contact:
Bryan - fridayonmonday@gmail.com
The engine was refreshed it recently. Have currently 1000 miles since rebuild. Leak down on all cylinders was only about 2%.
Retuned mildly to 400 WHP and 400 FTLBS at 14psi of boost on Superflow roller dyno. 468 WHP on Dynopack. Extremely safe timing, for our awesome CA 91 crap octane. Tuned by Shawn Church.
Cars is exceptionally easy to drive on the street for a car of its caliber. The Veilside body kit is authentic, not a knock off, body kit as you can see was molded in. Color is candy red so has been well taken care of and not left outside to fade. A/C works great. I have the Veilside wing for the buyer, I preferred the car now without because of the sleek side profile.
CHECK OUT THE CAR IN ACTION -
Car was originally in Turbo magazine years ago, have the original publication. Seats have been re-upholstered since then.
No low ballers, everything on this car is real!
ENGINE MODIFICATIONS
ECU/TUNING: Osiris Uprev
BLOCK: Nissan VQ35D, CP Pistons 8.5 to 1 Compression, Carrillo Rods, ACL Race Bearings, ARP Main Studs
HEADS: Factory Heads, Factory Valves, Eibach EVS Valvetrain, ARP Head Bolts
TURBO: Greddy Twin Turbo Kit
INTAKE: Project Import Intake Manifold Kit w/ 5/8 spacer
MANIFOLD/DOWNPIPE/EXHAUST: Helix test pipes, HKS Full Dual Exhaust
FUEL DELIVERY: Walbro 255LPH Fuel Pump, Grams 1000cc Injectors, Z1 Motorsports Fuel Pressure Port
COOLING: Koyo Radiator
COMPONENTS: Project Import Breather Kit
DRIVETRAIN MODIFICATIONS
TRANSMISSION: Factory 350Z - Rebuilt about 5k ago
CLUTCH/FLYWHEEL: McLeod Racing Street Supreme Clutch Kit and Supremacy Aluminum Flywheel
DIFFERENTIAL: Factory 350Z w/ Quaife LSD
SUSPENSION MODIFICATIONS
SHOCKS/COILOVER: Tein Flex Coilovers with EDFC
BRAKE MODIFICATIONS
Brembo GT series big brake kit
WHEELS & TIRES
20″ x 9.5 20″ x 13 Work Miester S1, Hankook Ventus V12
MISC MODIFICATIONS
GAUGES: AEM AFR Gauges, Greddy Boost and EGT Gauge
EXTERIOR: Complete Veilside Version III Body Kit, custom side splitters
INTERIOR: Custom Upholstered Seats by Body Craft OC
Last edited by fridaytech21; 08-10-2017 at 08:07 AM.
07-11-2017, 12:26 PM
#8
Registered User
Thread Starter
