baileyrx

iTrader: (16)

My guy has just about finished puting all the stuff back onto the built block.
Including the manifolds & turbo's!!!!

Fuel return goes on friday then sat or sunday reinstall the block

see pics:

wastegate relocation mod:

bumper brackets cut (pretty easy to do):
-we cut the back of the aluminium bumper brace
-also cut the actual bracket that attaches bumper to the frame rails

350zDCalb

iTrader: (21)

that sure is a perty motor great to see the project going along...looking forward to seeing some dyno numbers

taurran

iTrader: (18)

Lookin good. Its nice to see that you'll retain the bumper brace, even if it has been cut on a little. A cut brace is much better than nothing at all.

Sharif@Forged

iTrader: (92)

The brace modification is awesome. I knew the backet had to be cut, but I didnt realize the stock bumper brace would fit, with some trimming. Thanks for sharing.

punish_her

iTrader: (8)

Sorry to dredge this up, but is it both bumber brackets that need to be cut or just the passanger side? Been trying to find the info out for a while to retain the stock bumper.

Thanks

baileyrx

iTrader: (16)

as far as the brackets, it was just the passanger side.
for the cross brace/bumper itself, it needed to be trimmed just about all the way across the back