for a jl 250/1 1 12w3v2 or 2 10w0's?
Thread Starter
Registered User
Joined: Oct 2004
Posts: 59
Likes: 0
From: Federal Way, Wa
for a jl 250/1 1 12w3v2 or 2 10w0's?
I had 2 10w0s like 5 years ago with an alpine amp, I was happy with it. But for this amp wich would give a louder cleaner sound? 1 12w3v2 or 2 10w0s?
The 2 10's will generally produce more SPL than on 12, however it is a little more complicated than that. Are you going to used a sealed or vented enclosure? There is more surface area for 2 10's combined, therefore it's physically easier for them to produce a higher SPL than 1 12.
As far as the "cleaner" sounding part. I smaller driver will tend to be quicker allowing that somewhat tighter sound. However, with a really good line of subs, such as the w7's, there is very little difference in the quality of sound from the 10 through the 13.5.
As far as the "cleaner" sounding part. I smaller driver will tend to be quicker allowing that somewhat tighter sound. However, with a really good line of subs, such as the w7's, there is very little difference in the quality of sound from the 10 through the 13.5.
Last edited by done12many2; Dec 22, 2004 at 03:41 PM.
Thread
Thread Starter
Forum
Replies
Last Post
