|
sintaxeror's Valentine 1 and Laser Interceptor install log - tons of PICS/No 56k!
Hey kids.. I bought a V1 and an LI, guess its about time I got around to a proper installation. For those of you familiar with my audio build thread, you know this will probably take forever, and there will be a crap load of pictures. So here goes, update numero uno.
Started by taking my center console out. http://farm4.static.flickr.com/3648/...31815ce48f.jpg This is much easier with the AI dash kit for the stereo. http://farm4.static.flickr.com/3590/...caa87aef7e.jpg Got it out and in the workshop (living room, you guys know how I roll). http://farm4.static.flickr.com/3643/...b01d767508.jpg Took the cubby out. http://farm4.static.flickr.com/3439/...cfa13871e3.jpg Since I am going to take a couple of weeks for this most likely (work has been busy), I got a cheap replacement cubby for the meantime. http://farm4.static.flickr.com/3113/...fe4d017b0f.jpg Reinstalled console.. http://farm4.static.flickr.com/3463/...f5e53d82ff.jpg How I currently have my V1 mounted... no no no This just won't do. http://farm4.static.flickr.com/3640/...7a2fd18126.jpg Took the door off of the cubby.. http://farm4.static.flickr.com/3646/...c8a5e27c42.jpg Back of the door.. http://farm4.static.flickr.com/3430/...97ec164710.jpg Took the backing off.. http://farm4.static.flickr.com/3432/...12054289db.jpg Another shot.. http://farm4.static.flickr.com/3595/...52f27166f8.jpg Marking up a little with some masking tape.. http://farm4.static.flickr.com/3627/...5fb0826a75.jpg V1 remote concealed display.. http://farm4.static.flickr.com/3567/...9810f41ca5.jpg Disassembled.. http://farm4.static.flickr.com/3647/...fab460cfa2.jpg Then.. I took my dremel and files to the cubby door... (sorry for lack of action shots.. I was focusing) http://farm4.static.flickr.com/3584/...58352dba2b.jpg Cover plate for the concealed display fits right in.. http://farm4.static.flickr.com/3612/...d59ceae5a2.jpg Super glued and clamped.. http://farm4.static.flickr.com/3568/...f0b5dbb487.jpg Glued into place... http://farm4.static.flickr.com/3594/...f0efc4f3a8.jpg That's all for now, hope you guys follow along! COMMENTS are always appreciated! |
nice i remeber ur sub build :)
|
How will you rewire the old v1 display? Been looking at reassembling the large display for a smaller, thinner one.
|
In for an awesome DIY!!
|
here we go again....
should be good |
Originally Posted by booey1979
(Post 7104627)
How will you rewire the old v1 display? Been looking at reassembling the large display for a smaller, thinner one.
|
UPDATE 3/22/09 Afternoon
Got a little bit done today... might get a few things done tonight before I go to sleep. We'll see... right now I am too distracted by basketball... Put the cubby lid back together.. http://farm4.static.flickr.com/3634/...75046625b7.jpg V1 uses phone cord for everything, so a little 8" patch cable and a coupler to connect to the rest of the system. Also reattached the lid to the cubby. http://farm4.static.flickr.com/3559/...d68801ced0.jpg Finished product. You can see the super glue fumes frosted the plastic a little around the edges, I have since scrubbed that film off and used a little Armor All to restore the shine. http://farm4.static.flickr.com/3605/...8b984a69da.jpg Another shot.. http://farm4.static.flickr.com/3634/...00ce520954.jpg Quick test.. still works! http://farm4.static.flickr.com/3441/...9072c89bb8.jpg I don't have a steady hand... http://farm4.static.flickr.com/3437/...979a85a517.jpg Well, that was the first half of stage one... What is the second half you say? Lets take a look... Marked up some 2" PVC - Anyone know where I am going with this? http://farm4.static.flickr.com/3435/...14a99c738f.jpg Cut out the rough shape.. http://farm4.static.flickr.com/3461/...c062ca4c22.jpg Rubbed it flat with some sand paper.. http://farm4.static.flickr.com/3550/...80fd4d0cdf.jpg Let me explain what I am doing.. The LI that I am also installing has voice alerts. I keep my music up loud, and as a general rule of thumb I pretty much hate electronics with voice alerts... The LI also has a little power switch with integrated dim LED which flashes as an alert. Since I plan on installing this out of the way, it is also not going to be effective at alerting me to being clocked by lidar. So, I need to set up a visual indicator that is bright, all up in my face, but also blends well with the interior. The remainder of this pvc experiment is what I came up with. Just follow along and you will start to see, if you haven't already. Test fit..looks good. will fit better when i mount it with foam tape which will space it a little. http://farm4.static.flickr.com/3550/...4ed5904d0a.jpg Marking out some acrylic for a back piece... http://farm4.static.flickr.com/3438/...6eca96e06b.jpg Cut out and glued into place.. http://farm4.static.flickr.com/3430/...991c4d9c20.jpg Trimmed and filed down flush.. http://farm4.static.flickr.com/3624/...85461e89e5.jpg Drilled holes for LEDs and wiring.. http://farm4.static.flickr.com/3587/...61acbf339d.jpg Hit the inside with a few coats of Krylon Fusion Satin Black.. http://farm4.static.flickr.com/3576/...d4c5e09c78.jpg More to come soon!... Comments and questions are always welcome! |
wow sick, nice job. In for updates.
|
Looks interesting...subscribed!
|
Originally Posted by sintaxeror
(Post 7106719)
I'm not following your question.... can you clarify?
|
Originally Posted by booey1979
(Post 7108102)
I've seen these remanufactured V1 displays on ebay where they take them out of the case, and only use the front portion of the concelled display, then use epoxy to form a thinner case. They then have to redo the wiring to hook it up to the telephone wire.
|
Originally Posted by sintaxeror
(Post 7108110)
They don't have to redo the wiring. Take apart the concealed display and you will see, the whole thing is a ton smaller than the case it comes into, and the jack is attached to the board.
AHHH me thinks I might have a project this summer. I'm using my nav cubby as a rear view mirror monitor but I wonder if I can flush mount that detector in there... Cool can't wait to see the results. Whats the ETA to the completion? |
Originally Posted by booey1979
(Post 7108119)
AHHH me thinks I might have a project this summer. I'm using my nav cubby as a rear view mirror monitor but I wonder if I can flush mount that detector in there...
Cool can't wait to see the results. Whats the ETA to the completion? |
NICE! Another one of your threads to follow. I rmeber making my amp rack then seeing your sub project at the same time and going "DAMN MY AMP RACK AINT **** COMPARED TO THAT!" lol
|
holy **** you're a bad man.
|
wow sick!
i love your build threads lol! |
Sick job! :thumbup2:
|
subscribed :D
|
still patiently waiting.. =)
|
Originally Posted by SlideFox
(Post 7104776)
In for an awesome DIY!!
|
| All times are GMT -8. The time now is 11:10 AM. |
© 2026 MH Sub I, LLC dba Internet Brands