yup wed night should be fun, i am actually going to tune the car this time!! i still havent had time to tune it since i put the motor in there months and months ago, i just set it up rich and safe and have had it there since..
i am thinking somewhere around 22 psi and maybe 150 shot. we will see how everything looks. i want 9.5 at 145, thats my short term goal, 9.99 should be easy to get from what i think... |
sounds awesome. Good luck with the 9's.
|
Originally Posted by Audible Mayhem
9.99 should be easy to get from what i think...
you suck! J/K only wish I could make that statement. -Peter |
Wednesday......I'll be there.
I'll be in town by then and I'll be there to lend a hand. It'll be awesome to see it get down the track sub 10 seconds!
|
Originally Posted by theking
I'll be in town by then and I'll be there to lend a hand. It'll be awesome to see it get down the track sub 10 seconds!
|
Originally Posted by bacalhau16
Looks like its off an older vette or something beastly!
Corvettes have always been IRS, since the beginning. That, my friend, is a solid axle. |
that is going to take just a bit of welding to make work... hehehe
i was correct on my guess on what rearend it was, just look at the rims... i can see a detroit locker coming soon :icon38: :icon38: |
WOOOOW congratsss man well done we r all feeling very proud :-) Keep it up
|
8.8 is mudstang i have 1 on my ae86 :)
|
Originally Posted by Ep3
8.8 is mudstang i have 1 on my ae86 :)
|
9.50s will be easier to reach than you think IMO...
aim high!!!! |
I didnt know that vettes have always had a IRS. Thats pretty interesting. I guess my next guess wouldve been a mustang. Thats awesome stuff.
|
Hey Jeremy, I got my diff/suspension repaired from my last trip to OSW, so I should be out on Wednesday as well!!
See you guys there, Mike |
^^ Sweet another 9 second Z, see you there Z Gad!
|
i might just go all out and see what these turbos will do wednesday night, who cares??!!!
i want some mid 9s, thats my goal for wed... |
Originally Posted by Z-Gad
Hey Jeremy, I got my diff/suspension repaired from my last trip to OSW, so I should be out on Wednesday as well!!
See you guys there, Mike see ya wed! |
You guys do have someone good recording this all for us, right? I would join you because I have Wednesdays off, but its a 24 hour drive, or a 4 hour flight. So thats probably not going to happen!
|
Originally Posted by Audible Mayhem
i might just go all out and see what these turbos will do wednesday night, who cares??!!!
i want some mid 9s, thats my goal for wed... Just becareful with the axels :) They are still stock right. I cant remember if you upgraded them yet or not? Later Todd |
yes sir, stock axles, i have a new sponsor as soon as i break them but they have held up sooooo good so far.... must be the driver ;) ;)
i hope someone good comes out to record it, i probably have my friend eric coming to record it but i am not sure as of yet... |
Originally Posted by Audible Mayhem
yes sir, stock axles, i have a new sponsor as soon as i break them but they have held up sooooo good so far.... must be the driver ;) ;)
i hope someone good comes out to record it, i probably have my friend eric coming to record it but i am not sure as of yet... I think your right :) Driver has alot to do with it. Im getting there though :D Sometimes you have to learn the hard way. Looking forward to more videos, congrats again on your times so far. You must be doing something right, plus all the smoke blown up your arss helps too :) Later Todd |
Well its Weds and talked to Je quite a bit yesterday.. He was hittin the strip today..
|
^^ Yup, I am excited and I'm sure everyone else is. Cant wait to see Jeremy hit 9's, so far weather is good... not too humid. Should be 70 degrees though, thats kinda warm for me.. 55-65 would be better
EVen December in Florida is WARM!! |
Originally Posted by ZLadie2000
^^ Yup, I am excited and I'm sure everyone else is. Cant wait to see Jeremy hit 9's, so far weather is good... not too humid. Should be 70 degrees though, thats kinda warm for me.. 55-65 would be better
EVen December in Florida is WARM!! What time you guys plannin on starting at the track? 70 isnt bad.. Its been 40-ish here all damn day.. burrrr.. In Az. too :cool: this weekend at the strip its going to be 50's.. :D |
^^ I plan to be there at 6-6:30
|
Originally Posted by ZLadie2000
^^ I plan to be there at 6-6:30
Kind of drizalled here a few mins ago.... I am 6 miles away from the track..... I think its gona rain!!! |
Nooooooooooooooo!!!!!!!!!!!!!!!!!
|
Updated: 1 hr 14 min 46 sec ago
Observed at: Orlando, Florida Elevation: 112 ft / 34 m 73 °F / 23 °C Clear http://www.wunderground.com/US/FL/Orlando.html |
Was a good night for me anyway...
Ran a new personal best 9.208 @ 144.99 w/ 1.376 60' Last pass would have ben quicker, but I boogered up the 60' (1.495) but the car went 9.283 @ 145.89 |
Originally Posted by Z-Gad
Was a good night for me anyway...
Ran a new personal best 9.208 @ 144.99 w/ 1.376 60' Last pass would have ben quicker, but I boogered up the 60' (1.495) but the car went 9.283 @ 145.89 I witnessed that one..... |
So did Jeremy run his car or....
|
i was there also his car was sick
|
hey guys, i had too much air in the tires the first run for 22 psi and 125 shot.
i spun really bad off the line, hit second and got pretty side ways, i just let off. i ran a very impressive 18.6 @44 mph!!!! i actually lost 9 in the last 1/6th, very proud... then, i pulled up for my last and final run, and i was leaking oil, i think the cold start and the burnout combined did something to the greddy oil return line on the passenger side. DAMNIT!!!!!!!!! i was soooo ready i am going back friday and then our track is closed until jan 10th, i will get it. on the first run, the car hit 20 psi in first gear, it was pretty sick for spinning soooo much, that was on a 125 shot as well... hehehe i will keep it updated on friday, i have a lot to do and fix my car by then, im sure i will find time. very cool meeting everyone there last night that i havent met before. |
Originally Posted by blktrack350
i was there also his car was sick
hey man, make sure you introduce yourself to me when you are out there, there were LOTS of VQs there last night, very good showing.. :) thanks on the props, i didnt have time to clean it up but friday it will be clean and ready to run some 9s... |
Originally Posted by Audible Mayhem
hey man, make sure you introduce yourself to me when you are out there, there were LOTS of VQs there last night, very good showing..
:) thanks on the props, i didnt have time to clean it up but friday it will be clean and ready to run some 9s... The other guy was running into you on your first run....... Did you see that ?? Your car took off pretty sick man ......damn fast |
Originally Posted by Kenk2
Updated: 1 hr 14 min 46 sec ago
Observed at: Orlando, Florida Elevation: 112 ft / 34 m 73 °F / 23 °C Clear http://www.wunderground.com/US/FL/Orlando.html LOL :icon18: :icon18: |
:( Whats so funny.. I wanna laugh too...:confused: :(
|
Originally Posted by Kenk2
:( Whats so funny.. I wanna laugh too...:confused: :(
|
Originally Posted by ZLadie2000
It's funny how you were monitoring our weather. You, my friend, are HARDCORE. :)
LOL.. Yea I guess Jeremy has gotten me to this point.. Seeing what he is doing with the Z and me going to the strip last weekend put me over the edge.. I want to see him get 9.5 worse than him :D |
yeah jeremy is so hardcore he took off his front bumper side markers to save on weight. I still havent asked him why his stock antenna is still on there though. lol its not necessary :)
|
yea i will probally be going back on friday to try to get the 60 down to a 1.9 and maybe a 13.6/13.7
|
Originally Posted by ZLadie2000
yeah jeremy is so hardcore he took off his front bumper side markers to save on weight. I still havent asked him why his stock antenna is still on there though. lol its not necessary :)
How did you do last night? |
yeah man, i will be out there tomorrow night too, see ya there..
make sure you say whats up!! i hope i get a clean run this time damnit, oil leaks are nooooo fun!! |
Good luck tonight! Let us know how you do. No videos of Wednesday performance, hopefully tonight will have someone behind a camera just in case!
|
i have video of me taking off, getting sideways, spinning, straightening it out, hitting second and getting sideways again, but what fun is that!!??
then i am sure there is the great video of me doing a cool burnout and then pulling up to the line and leaking oil on the track... :D :D :D |
Originally Posted by Audible Mayhem
i have video of me taking off, getting sideways, spinning, straightening it out, hitting second and getting sideways again, but what fun is that!!??
then i am sure there is the great video of me doing a cool burnout and then pulling up to the line and leaking oil on the track... :D :D :D I may come out to spectate tonight. I pulled my 1000cc injectors this morning to send them out. I am trading even up for a set of 1600cc's. I was just over 100% duty cycle on the 1000cc's when I was shifting at 8000.:eek: I may move up to something bigger than my PT76GTS turbo for the new year, so I should think ahead for the supporting mods.... :rolleyes: |
Originally Posted by Audible Mayhem
i have video of me taking off, getting sideways, spinning, straightening it out, hitting second and getting sideways again, but what fun is that!!??
then i am sure there is the great video of me doing a cool burnout and then pulling up to the line and leaking oil on the track... :D :D :D |
ok, going out to see what the damage is right now, should have it ready by track time!!
see ya later mike if you make it... thanks ken!! |
Originally Posted by Z-Gad
LOL!!
I am trading even up for a set of 1600cc's. I was just over 100% duty cycle on the 1000cc's when I was shifting at 8000.:eek: I may move up to something bigger than my PT76GTS turbo for the new year, so I should think ahead for the supporting mods.... :rolleyes: |
Originally Posted by ZLadie2000
wow, you are a god!!:eek:
thats GAD to you ... |
Originally Posted by Audible Mayhem
thats GAD to you ...
BTW - nice meeting you ZLadie |
All times are GMT -8. The time now is 02:10 AM. |
© 2024 MH Sub I, LLC dba Internet Brands