MY350Z.COM - Nissan 350Z and 370Z Forum Discussion

MY350Z.COM - Nissan 350Z and 370Z Forum Discussion (https://my350z.com/forum/)
-   Engine & Drivetrain (https://my350z.com/forum/engine-and-drivetrain-50/)
-   -   How much power will a stock vq35de hold? (https://my350z.com/forum/engine-and-drivetrain/407783-how-much-power-will-a-stock-vq35de-hold.html)

evilevo35 12-31-2008 05:14 PM

How much power will a stock vq35de hold?
 
I just got a 2003 nissan 350z touring edition with a vortech super charger kit, nismo exhaust, twin disc and etc. How much power will the stock vq35de motor hold? I understand its not the det I have a 35r evo so I kno the difference between boosted motors and non boosted motors. I was just wondering what the stock internals can handle on it.

kacz07 12-31-2008 05:16 PM

safely, 350-400whp.

evilevo35 12-31-2008 05:18 PM

What would be pushing the limits on it?

Sharif@Forged 12-31-2008 05:52 PM

400whp+ is pushing the limit, and can reduce it's life. That said, if its well tuned and setup, you can probably run it safely at the power level for a fairly long time. Sub 400whp and well tuned...almost no chance of failure. Key words...WELL TUNED. :)

evilevo35 12-31-2008 06:03 PM

What about the vq35det motor? If I stayed with the vq35de how would you suggest I start building it with a thicker headgasket to lower compression?

Z1 Performance 01-01-2009 07:36 AM


Originally Posted by Sharif@Forged (Post 6748291)
400whp+ is pushing the limit, and can reduce it's life. That said, if its well tuned and setup, you can probably run it safely at the power level for a fairly long time. Sub 400whp and well tuned...almost no chance of failure. Key words...WELL TUNED. :)

and not too highly rev'd :)

Z1 Performance 01-01-2009 07:39 AM

if you are building an engine, then get the right CR via pistons, etc. Can't really go with thicker headgaskets on this engine as the front cover would then not fit properly, nor would the timing chain, etc etc.

jonnylaw 01-01-2009 07:39 AM

the op is non-rev.

A revup should take a tad bit more power no? The revup has slightly beefier rods than the non-rev?

2004Black350z 01-01-2009 11:20 PM

:icon22:

davidv 01-02-2009 08:07 AM

450 horsepower.

evilevo35 01-02-2009 08:20 AM

is that to the wheels?

citymunky 01-02-2009 08:31 AM

I would not pass 400 WHP.

go-fast 01-02-2009 10:25 AM

287 hp

2004Black350z 01-02-2009 10:34 AM


Originally Posted by evilevo35 (Post 6752657)
is that to the wheels?

no thats to the intake

OldDirty Z33 01-02-2009 10:36 AM

To the walls

SOLO-350Z 01-02-2009 10:47 AM


Originally Posted by 2004Black350z (Post 6753205)
no thats to the intake

Wow you are a idiot. That is to the flywheel. How much do you know about cars really?!

:gotowned:

2004Black350z 01-02-2009 10:51 AM


Originally Posted by SOLO-350Z (Post 6753277)
Wow you are a idiot. That is to the flywheel. How much do you know about cars really?!

:gotowned:

Solo havnt u learned not to fck with me? Ur a fcking Idiot do u not see the sarcasm in this WHOLE thread? Dont do what u did last time and stalk my post and try to "Own" me bc u know what will happen old man. Go back to nuthugging for uprev and the HR:thumbup:

burner 01-02-2009 10:52 AM

The guys at Uprev in Austin, TX told me that anything over 380whp would be pushing it. Up to that, stock internals should be very reliable.

SOLO-350Z 01-02-2009 10:55 AM


Originally Posted by 2004Black350z (Post 6753288)
Solo havnt u learned not to fck with me? Ur a fcking Idiot do u not see the sarcasm in this WHOLE thread? Dont do what u did last time and stalk my post and try to "Own" me bc u know what will happen old man. Go back to nuthugging for uprev and the HR:thumbup:

Sarcasm?!?!? Dude you were wrong just admit it. Learn some damn English too.

Oh I am sorry didn't you post in another thread trying to start crap again? I mean it seems to me you are the stalker.

JSDZ33 01-02-2009 10:55 AM


Originally Posted by 2004Black350z (Post 6753205)
no thats to the intake

actually you're both wrong it's to the battery


All times are GMT -8. The time now is 01:24 AM.


© 2024 MH Sub I, LLC dba Internet Brands