high rpm 350z
 

So i was driving down the highway and just make a right at a stop light, of course im at 1st gear then rev up to around 6500 rpms then shift to 2nd this time i rev up to around 7000-7300 rpms and the engine seemed to stall for a split second? this was the first time i decided to get around the 7000 rpms section, im not sure if it was an rev limiter but the engine stopped and i quickly shift to 3rd

i have a 2004 350z, roadster

the car feels different after that happened, well maybe its my imagination haha the mind is a pretty crazy thing, but takes a bit more [i think] for 2nd gear to reach the 5000 rpms.

has this happened to you guys by revving that high?

thanks !

:thumbup:

With your rev limiter set at 6800 how did you ever hit 7300 rpm?

thats why im asking

i read that the revs reach 6800 only, but ir eached 7000ish rpms and the engine stalled or turned off for a second and i shifted to 3rd

has anything like this happened to you? engine can get damaged?

You bounced off the rev limiter...

Is this your first car?

how old are you and how long have you been driving manual???

21 and 2 years

first vehicle silverado.

Sounds like whoever you bought it off of might have had it flashed. Would of switched the rev limiter around where you're r talking about the "engine shutting off."

maybe, the car was totalled and rebuilt, and the guy sold it to me with a nismo exhaust, fujita intake, g35 volks , and other things , but i have no idea if the ECU was flashed, anyways does it matter if the rev limiter bounce off? sorry english not my first language im from brazil hehe

What are G35 Volks?

this is gonna be bad...

sport rims on a infiniti g35 sorry as said not the best when it comes to typography hehe

in my 06 G the rev limiter allowed it to rev 2-3 hundred over redline, sounds like the same thing. big woop, u wanna fight about it?

just curious if the Z engine, the VQ can handle something like this,

how unhealthy is it for the engine

Oh, G35 Rays.

ya, but arent they affiliated, same thing basically?

sorry for the confusion spork

I'm just being a douchebag. :)

while youre here spork, any engine damage or anything harmful happen if i bounce off rev limiter? ^^ thank you its really hard to read explanation on this i dont understand some english words thanks

and i dont race my car like most people here just regular driving i dont want to look like a dumb guy and dont know about car because i have a 350z, i just got this car really cheap and well im more into studying career so yea if i can just get really quick help if something can happen to the engine i appreciate help

thank you

http://emptyfield.com/blog/uploaded_...lat-750095.jpg

Be careful at 7,000 RPM plus. You will go into the 4th dimension and we may never get you back.

lol watch a drift video and you will have your answer

stuck accelerator
 

stuck accelerator pedal?

This isnt a toyota forum retard.

:bowrofl::bowrofl::bowrofl:

Not necessarily. My Z does the same crap now, the needle runs to 7500RPM. Osiris logs show redline is 6950RPM. The tach eventually becomes uncalibrated. Before my tune, the needle would go as far as 7200RPM, and Osiris would log 6650RPM redline.

Japanese quality for you.

Not unless you do it repeatedly

LOL! you guys are too funny.

To the Op. Unless you're hearing a knocking or loud metal grinding, i'm sure you're ok. Go check your oil, and play with the rev limiter.


Spork! what is that? Thought there was some crap on my screen. lol