MY350Z.COM - Nissan 350Z and 370Z Forum Discussion

MY350Z.COM - Nissan 350Z and 370Z Forum Discussion (https://my350z.com/forum/)
-   Engine, Drivetrain & Forced-Induction (DIY) (https://my350z.com/forum/engine-drivetrain-and-forced-induction-diy-458/)
-   -   Utec twin turbo base map. (https://my350z.com/forum/engine-drivetrain-and-forced-induction-diy/619000-utec-twin-turbo-base-map.html)

*Dori star* 03-30-2018 04:12 AM

Utec twin turbo base map.
 
Having completet my Gtm twin turbo install i need a base map for my Utec, to start the car on.

running 600cc DW Injectors it's hard to find anything compatable.

anyone Got something for a fellow Utec dude.https://cimg6.ibsrv.net/gimg/my350z....cdd3c2ec77.jpg

bealljk 03-30-2018 06:25 AM

PM iideadeyeii I think he is well-versed with the UTEC setup.

andybp 03-30-2018 08:54 AM

the hks map ran 600cc injectors

iideadeyeii 03-30-2018 10:39 AM

https://turboxs.com/engine-managemen...continued.html

Click on attachments.



I'd use the APS 550cc map and go from there which has "aggressive" timing parameters compared to the TN kit which is 17 at full boost vs like 11-12.


I am not sure how much boost the APS is meant for, but you can see table max boost when it's loaded.

It will run, but if anything you'll run a little rich, but that's an easy fix

*Dori star* 03-30-2018 11:56 AM


Originally Posted by iideadeyeii (Post 10947936)
https://turboxs.com/engine-managemen...continued.html

Click on attachments.



I'd use the APS 550cc map and go from there which has "aggressive" timing parameters compared to the TN kit which is 17 at full boost vs like 11-12.


I am not sure how much boost the APS is meant for, but you can see table max boost when it's loaded.

It will run, but if anything you'll run a little rich, but that's an easy fix


Thank you sir.

I didnīt know they still kept the maps on the webpage. but awesome!

That will get it running untill tuned...

Edit: i canīt see the data correct, is the files word files or what do you view them with?

Cux350z 03-30-2018 03:59 PM

add a .txt extension to the end and open with notepad.

UTEC is antiquated.

*Dori star* 03-31-2018 09:55 AM

Thx.

And might be, but still a proven performer.

*Dori star* 04-15-2018 09:28 PM

Thanks for all the help so far. Much apriciated.

but i'm still having trouble Reading the files in notepad.

when i view them, it's all Numbers in no apperent order.

I just wanna make sure i put the right Numbers in the right colums. Any thoughts?

iideadeyeii 04-16-2018 07:05 AM

Huh? Just upload it to Utec and read/modify it there

*Dori star* 04-16-2018 11:08 AM

I know.... i'm new to Utec.
i need to reed some more about it before i ask stupid questions.

i'll try and upload the files and see what it does


All times are GMT -8. The time now is 07:07 PM.


© 2024 MH Sub I, LLC dba Internet Brands