Utec twin turbo base map.
03-30-2018, 06:25 AM
#2
350Z-holic
iTrader: (13)
PM iideadeyeii I think he is well-versed with the UTEC setup.
The following users liked this post:
*Dori star* (03-30-2018)
03-30-2018, 10:39 AM
#4
https://turboxs.com/engine-managemen...continued.html
Click on attachments.
I'd use the APS 550cc map and go from there which has "aggressive" timing parameters compared to the TN kit which is 17 at full boost vs like 11-12.
I am not sure how much boost the APS is meant for, but you can see table max boost when it's loaded.
It will run, but if anything you'll run a little rich, but that's an easy fix
Click on attachments.
I'd use the APS 550cc map and go from there which has "aggressive" timing parameters compared to the TN kit which is 17 at full boost vs like 11-12.
I am not sure how much boost the APS is meant for, but you can see table max boost when it's loaded.
It will run, but if anything you'll run a little rich, but that's an easy fix
Last edited by iideadeyeii; 03-30-2018 at 10:44 AM.
The following 2 users liked this post by iideadeyeii:
*Dori star* (03-30-2018),
bealljk (03-30-2018)
03-30-2018, 11:56 AM
#5
https://turboxs.com/engine-managemen...continued.html
Click on attachments.
I'd use the APS 550cc map and go from there which has "aggressive" timing parameters compared to the TN kit which is 17 at full boost vs like 11-12.
I am not sure how much boost the APS is meant for, but you can see table max boost when it's loaded.
It will run, but if anything you'll run a little rich, but that's an easy fix
Click on attachments.
I'd use the APS 550cc map and go from there which has "aggressive" timing parameters compared to the TN kit which is 17 at full boost vs like 11-12.
I am not sure how much boost the APS is meant for, but you can see table max boost when it's loaded.
It will run, but if anything you'll run a little rich, but that's an easy fix
Thank you sir.
I didn´t know they still kept the maps on the webpage. but awesome!
That will get it running untill tuned...
Edit: i can´t see the data correct, is the files word files or what do you view them with?
Last edited by *Dori star*; 03-30-2018 at 12:32 PM.
Trending Topics
04-15-2018, 09:28 PM
#8
Thanks for all the help so far. Much apriciated.
but i'm still having trouble Reading the files in notepad.
when i view them, it's all Numbers in no apperent order.
I just wanna make sure i put the right Numbers in the right colums. Any thoughts?
but i'm still having trouble Reading the files in notepad.
when i view them, it's all Numbers in no apperent order.
I just wanna make sure i put the right Numbers in the right colums. Any thoughts?
Thread
Thread Starter
Forum
Replies
Last Post
taywan
Forced Induction
8
11-09-2011 05:49 PM