I just order the NR aluminum overlays. I wanted to get a heads up on how they install before I attempt to do them this weekend. I know how to realign the needles using a camera and the Shift light, but wasn't sure how I get to the gauges themselves. I'm not sure if the NR overlays come with direction to get to the gauges or just how to get the needles off, etc... Any help will be greatly appreciated, Thanks Rob
BTW 2003

 

1. Under the steering wheel, there are about (4) phillip screws. Remove them

2. Remove the lower steering wheel cover, its all clips on I believe. You'll have to lower your steering wheel and slide them out.

3. Now that everything is visible, there are (4) 10mm screws that need to be remove.

4. Lower your steering wheel and unplug one plug behind the cluster.

5. You should be able to pull it out.

6. The rest should be easy, just all screws.

Sorry I if I left anything out and that I don't have pictures. Trying to remember everything.

 

Hey, thanks alot Hopefully it will go as simple as you say, Rob

 

NP, glad to assist you.

 

if you ordered the gauge faces from them, they will include a printed out, pics included, step by step instruction manual. it is a very useful tool.

 

Cool, so I should be all set then, I ordered directly through NR. Thanks Guys

 

remember to take picture step by step. That way, it will be more helpful for the next guy.