very nice! Exactly what I'm going to be having done! 2 gauges where you put them, keep the stock multi gauge, then I still have to decide what to do with the A/F gauge and the remaining Defi gauge, one problem I might have is that I have all 3 Defi's 52mm size while the AEM one is larger... gauge pillar seems like a solution, but the 2 gauge sizes might cause a little issue there
|
great job
|
What gauges are those? They're beautiful :)
Link? |
STRI SLM II Smoke Amber Gauges.
|
52mm, correct?
|
|
Originally Posted by TheMinel
(Post 7333463)
very nice! Exactly what I'm going to be having done! 2 gauges where you put them, keep the stock multi gauge, then I still have to decide what to do with the A/F gauge and the remaining Defi gauge, one problem I might have is that I have all 3 Defi's 52mm size while the AEM one is larger... gauge pillar seems like a solution, but the 2 gauge sizes might cause a little issue there
The DEFI BF series are 60mm. |
Originally Posted by xzotklr
(Post 8140715)
The DEFI BF series are 60mm.
yeah I've since found out, had to do it this way http://i722.photobucket.com/albums/w..._2177Small.jpg |
Why not use a multi-gauge or two? The PLX gauges actually fit inside the housing; it looks completely stock.
|
If you dismantle the 60mm defi gauge and remove the silver bezel, modify the rear aluminium cup (be cautious as there is a tiny ground spring) and reshape the inside of the oem cowl you can get the gauge to sit behind the factory silver bezel for the true factory look as what I did on my Z.
http://i871.photobucket.com/albums/ab277/MRRIZK/Pod.jpg |
km/h speed looks crazy! all those three digit numbers crammed in haha...
i only wish the lighting matched the oem or vise versa. |
Those guages look awsome in there.
|
Originally Posted by MDK
(Post 8143486)
Why not use a multi-gauge or two? The PLX gauges actually fit inside the housing; it looks completely stock.
|
I was searching around in hope I find this. So I had to bring it bad to life. I have 2 AEM 2 1/8" gauges (Wideband and Boost) I want to fit in the stock gauge location. Will I have to mount them from the inside without the bezel or can they be mounted the same as it would be on a A-pillar gauge pod?
|
nothing new. This has been my setup for a long time.
http://i158.photobucket.com/albums/t...L/DSCN0393.jpg |
how did you separate the first two gauges? They are mounted on the same circuit board.
|
Originally Posted by y0shi
(Post 8546886)
how did you separate the first two gauges? They are mounted on the same circuit board.
removing the black housing will clear enough space to mount the gauges.:thumbup: |
Originally Posted by JustinTime
(Post 8546794)
nothing new. This has been my setup for a long time.
http://i158.photobucket.com/albums/t...L/DSCN0393.jpg |
Originally Posted by midz350
(Post 8546950)
I didn't touch the circuit board.
removing the black housing will clear enough space to mount the gauges.:thumbup: |
The one in the upper right.
http://img154.imageshack.us/img154/556/snc00041.jpg Sorry, I did that over a year ago and I can't get any new pics. |
All times are GMT -8. The time now is 05:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands