FSP: Z34 Stillen Supercharger Installation
 

Hey guys, I figured I would share some pics of our latest project, a 2010 370Z fitted with the Stillen SC kit. Hunter wanted some extra power for the road course, but did not want the added complexity and costs associated with a twin turbo setup. We decided that the Stillen kit was just the right fit for his goals, and went to work on his Z. We have not been able to tune for wide open throttle due to a bug in our particular ECU ROM. We're currently working with Jarad at Uprev to resolve, and then it is off to the dyno :)

2010 Z34 6MT Sport Package
*Stillen Supercharger Kit
*Custom Failsafe Performance UpRev tune
*GTM / FSP 25 row oil cooler kit
*Berk Technology test pipes
*Saclam catback exhaust
*Tein Mono Flex coilover suspension
*SPC front & rear camber kit w/ rear toe bolts
*Defi Racer boost gauge
*Innovate LC-1 wideband gauge

Here are a few installation pics. Dyno tuning and videos to come soon! Enjoy :)

Removing the Gen 3 intakes
http://i38.tinypic.com/x3d5lk.jpg
http://i33.tinypic.com/211wjk2.jpg
http://i38.tinypic.com/308y5hi.jpg
http://i38.tinypic.com/33vdqfr.jpg
http://i38.tinypic.com/2922wyu.jpg
Extending the drivers side throttle body wiring
http://i37.tinypic.com/2j3kx34.jpg
http://i34.tinypic.com/wmja69.jpg
http://i34.tinypic.com/zme4o9.jpg
http://i35.tinypic.com/2ew0iuc.jpg
http://i34.tinypic.com/2e0r3px.jpg
http://i36.tinypic.com/miyjxs.jpg
http://i34.tinypic.com/14smjcx.jpg
http://i38.tinypic.com/2zh2ook.jpg
http://i33.tinypic.com/w2n37s.jpg
http://i37.tinypic.com/r88op4.jpg
http://i34.tinypic.com/1i22ox.jpg

sick! i cant wait for you guys to cam my car. :thumbup:

how many hours did the install take? that looks rather straight forward for a sc setup.

Anywhere from 12-15 hours from tear down to start up.

Nice!

sorry if this is a n00b question but...

Is there any benefit of having 2 intake filters when it looks like they're both going into the same pipe with a simple 2 -> 1 connector?

Clean as always. Great!

Probably can't fit a large one for the rated air flow. Otherwise, its detrimental.

No, the 370z has 2 MAF's, one goes in each of those pipes.

thanks... it makes more sense now that i take a second look at it.

My buddy just installed the same kit and I was asking the same question, then I found where the MAF's go.

Very nice kit.

I don't like how they merely accomodated the twin throttle body setup rather than designing to take advantage of it. What kind of blower - specs?

Thanks for sharing though. Looks like a nice, clean install - props.

EDIT: nm, found this:

Parts included in the kit:

• Vortech V-3 Series Compressor w/Pre-Assembled Laser-Cut Billet Aluminum Mounting Assembly
• (6) 600CC Fuel Injectors
• ECU Based Tuning Device
• High Output Fuel Pump
• Air-to-Water Intercooler System (Intercooler, Heat Exchanger, Pump, Hoses, Mounting Brackets)
• Polished Aluminum Intake Charge Pipe
• Cast Aluminum Intake Manifold
• Cold Air Intake Y-Pipe w/Draw Through MAF Sensor Bosses (as recommended by NISSAN)
• Genuine K&N Intake Filters

Dyno figures available from anyone with this setup yet????

Very nice, Chris. In for #'s.

same here :thumbup::thumbup:...in for numbers and let me know how u make out with the UPREV stuff...

In for numbers and wot vid of sc whine with saclam exhaust.

looks like a great system. Liquid to air heat exchanger is sweet. no pesky boost drop thru an air-air core.

Sweet :thumbup:

Did you have to extend the maf wiring also? Pic of extended harness?

Yes, the wiring for both MAF sensors need to be extended. I don't have a picture of the MAF wiring, but it looks exactly like the TB extension picture in the first post :)