Top 10 FI 350Z's
 

Whatup Every1,

A mention was made to create a thread regarding FI power numbers, so here it is (I made it the top 10 ). I will try my best to upkeep the top 10 list regarding most powerful Z's. If you believe you need to be on this list, just PM and I'll make the correction provided I got some dyno info from ya to compare .

So if you guys 'n gals can help out the rest of us fellow Z'ers in looking at available options FI wise, please post up the following if you have them:

*Dynosheet (Either picture or text) {Either post here or email me}
*Kit you have, if custom, maybe mention type of compressor
*1/4 ET & trap mph if possible
*PSI level
*Type of Dyno platform used

Much thanks to anyone who takes the time to contribute to this thread!

Okay ppl this is version 2 to hopefully get around some thread rules recently enacted that killed the last thread. This image route is a bit more a PITA to do since I'm not an expert at all using GIMP. I have new people to add, atleast 3 I can think of at the moment, so please be patient and the next update will include the poeple that need to be included!

When updates occur, you should only need to simply hit "reload" on your browser if the picture isn't automatically the newest one available.

L8te,
--j2

why are you using gimp then ?

Vortech?
 

So, where are all the VOrtech guys that belong on that list? I have seen 390's and some 370's and 380's.

Gentoo=Linux=Graphics?=GIMP=FREE

I'm well aware of the Vortech's and they're going on the list with the next update.

Great, thanks...just checkin!!

Updated!

Might need to refresh your browser to reload the image.

--j2

Juztin,
The #10 car on your list is me. Guru (Dan) at godspeed inc is my installer/tuner. The dyno that produced the 369 rwhp was at 6.5 psi without any tuning off the base map. The Z has since had a new fuel pump installed and ecu sent to technosquare for reflash. Tuning to occur with Greddy e-01 when ecu returns. With tuning, it should produce bigger numbers, but I am also going to have Dan tune it for higher boost. Once that is done, hopefully the #10 ranking changes :) I'll let you know when its all done.

Oops, my bad Yancy, will update! ;)

Fixed :D

wow its interesting how the turbos are kicking *** in the torque numbers

Any 1/4 times and traps for any of the top-10 folks?

Congrats to FluidZ, I am way behind I didn't know he even had his kit installed yet let alone 8 PSI! Anyone else running 9 PSI on stock internals? All of my guages are in spec. If so what are you using for timing and air fuel and have you chyecked your plugs lately? Thanks.

Top 10
 

Fluidz's post had a link to my initial dyno. I thought he was going with the ATI kit???

still enthuzd...

Juztin, Gentoo rocks! :D

I hope to join the ranks of the top 10. I am still waiting on my greddy kit.

How do you get around the ten minute edit feature, I hate that dang feature anyway?

Peas!

Damn straight etx :D , I'm sure you will be, just be sure to post up some dyno's 'n driving impressions once you get your beast put together ;)

Ya I linked enthuzd dyno so justin would update.........12sec don't know right know what im doing?.......may just stay with NOS and do body work, or may keep my car how it is and do F/I......what would you do after seeing my car in person?

Justin, That isnt my dyno, i linked enthudz so you could see his not mine.........maybe someday I will be on the list but not yet. Sorry for the confusion......Take care