MY350Z.COM - Nissan 350Z and 370Z Forum Discussion

MY350Z.COM - Nissan 350Z and 370Z Forum Discussion (https://my350z.com/forum/)
-   G35/G37 (https://my350z.com/forum/g35-g37-77/)
-   -   does any body know which wire is tachometer signal from ecu or other way.... (https://my350z.com/forum/g35-g37/88665-does-any-body-know-which-wire-is-tachometer-signal-from-ecu-or-other-way.html)

toylee 08-24-2004 02:43 AM

does any body know which wire is tachometer signal from ecu or other way....
 
hello guys..
Does anyone know what wire is the tachomerter signal wire from ecu or other way to get the signal. i try to find that answer all day but still no answer. i got 12v,ground,nightlight wires and mounted on front dash. it is ready to use. but no signal.......

2004 g35coupe manual

thanks

toylee 08-24-2004 09:33 AM

anyone

jpc350z 08-24-2004 09:53 AM

RPM SIGNAL
 

Originally posted by toylee
anyone
If the G35 ECU is identical to the Z's it wuold be pin #13 (white/blue) crank sensor. This from the Vortech s/c install instructions..

lorinserbenz 08-24-2004 11:36 AM

Re: does any body know which wire is tachometer signal from ecu or other way....
 
PIN 62 on the ECU will get the RPM.

toylee 08-24-2004 10:47 PM

Re: Re: does any body know which wire is tachometer signal from ecu or other way....
 

Originally posted by lorinserbenz
PIN 62 on the ECU will get the RPM.
pin62 do you know what color is it ... or how do i know where pin62 locate it...

SungNamZ 08-25-2004 07:05 AM

It is Y/R. I am assuming this is Yellow/Red (Stripe). If you go to:
www.vortechsuperchargers.com and then to "Support", you can find on page #11 of the 350Z "Installation Instruction" a the ECU harness.


All times are GMT -8. The time now is 09:09 PM.


© 2024 MH Sub I, LLC dba Internet Brands