ABS VDC SLIP lights are on
What are the causes of ABS VDC Slip lights on? Mine is 2006 Touring. Thank you.
|
Welcome. The slip light comes ON when the rear tires are slipping.
|
if u start doing some drifts or donuts, the slip stays on even after u stop, not sure why, turning car off resets the light
|
most likely throttle body
|
or low brake fluid
or bad brake switch |
had the same problem, ended up being the brake switch was getting stuck and all those lights would turn on. put a lil lube on the switch and its been working for over a year with no problems
+1 on checking the brake fluid level |
What tire sizes are you running?
|
You're welcome for the help.
(Beat davidv to the punchline). |
a short in led aftermarket brake lights was my issue dealt with it for awhile because it was at the same time my clutch was going and i thought it was that
|
Always happy to help. If you have other questions please do not hesitate to waste my time.
|
Helpp!!!!
Originally Posted by eldeguz
(Post 9672790)
What are the causes of ABS VDC Slip lights on? Mine is 2006 Touring. Thank you.
|
Originally Posted by Brandon z33
(Post 11013503)
I also need help with this issue I just bought my 04 350z a few months ago, my ABS SLIP VDC, and BRAKE ligh tare on my ABS and VDC do not work at all I constanly lose traction and I recently got in a car accident becuase my ABS was not working. I have checked the relay in the fuse box and the the harness everything is plugged in and the fuse/relay is good. I dont know how to tell if the speed sensors are bad and my car is lowered on cut springs, I'm not sure if the previous owner purpously disabled these things for drifiting but I was wondering what else I should check to fix this issue. I know if the ABS is failing or the VDC that it will trigger all the lights and cause all those traction related systems to fail. Please help thank you...
|
...........
|
and what were the codes?
|
Originally Posted by travlee
(Post 11013504)
he hasnt logged in for 8 years, dont wait on an answer from him. have you thought about pulling codes?
I got the codes read and it said a relay somewhere by the master cylinder this is all i could find https://cimg9.ibsrv.net/gimg/my350z....1ba35bf003.jpg I also did some reading and it said it could be this also. https://cimg1.ibsrv.net/gimg/my350z....17bcdf28a3.jpg |
dont remember exactly, it was some relay, the one in the fuse box is good so is the VDC fuse.
|
you know without those, we will all be guessing
|
Originally Posted by travlee
(Post 11013511)
you know without those, we will all be guessing
|
Originally Posted by travlee
(Post 11013504)
he hasnt logged in for 8 years, dont wait on an answer from him. have you thought about pulling codes?
https://cimg1.ibsrv.net/gimg/my350z....357c40c7a.jpeg https://cimg2.ibsrv.net/gimg/my350z....c46ca8b96.jpeg https://cimg8.ibsrv.net/gimg/my350z....59eb588fd.jpeg https://cimg5.ibsrv.net/gimg/my350z....f48d10a16.jpeg I have an 2003 Touring model Z, recently I have come across a problem. When ever I start up my car and pull out of a parking lot, driveway etc, my car start to jerk really bad as if my breaks are kicking in and out. Once I hit second gear my VDC light turns on and the SLIP light follows. Everything seems to work perfect after that. Now, everytime I start my care I have to turn off my VDC by hitting the button and take of in first then quickly shift to 2nd to avoid any jerking. I have seen that even if I have the VDC off, the problem isnt really gone till the slip light also turns on. quick summary, Turning off VDC and SLIP light on = No no jerking, runs ok. VDC on or off with no SLIP light = Problems |
okay so i just found out today that i actually have a touring coupe. whihc has cruis control. I have an aftermarket steering wheel an NRG quick release would me not having the buttons for the cruise control have to do with anything with the traction control. i was able to get the ABS light to go away. And fixed the ABS.
|
All times are GMT -8. The time now is 01:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands