Leo's G35TT Green Monster Build up!
 

Hey guys. I don't post much on the forums, but I finally decided put some time/pics together to show my build.
Hope you guys Enjoy!!! :) WARNING: IT'S LONG!!!

The Project Starts...

I picked up 1yr old 06 G35 Coupe with 16k mi on it from Kenny (da mayor) @ Infiniti of messapiqua on July 4th 07.
(The dealership was closed for Independence Day, but Kenny personally came out and delievered my car on his holiday. Thanks for the special delievery haha.)
Pic of the same night. I didn't remember what it looked like until I saw this picture haha.
http://g35driver.com/forums/members/...-g35-stock.jpg

Now the Fun Starts...
V1. Clean and Simple...

- Interior/System
Coming from European Tuning seen, I wanted my car look Simple and Clean. and Wanted to go for more VIP style-ish. So I got the Interior and Sound system done to accompany my car's VIP look.
- Sparco Milano Prestige 2 custom upholstered.
- Sparco Flash 5 Steering Wheel, Drift E-brake, Sport Pedals, Racing Harness
- Matching Door Panels, Rear Seats, Re-uphostered Dash, Center Console, Wrapped all the panels, pillars, rear deck....
- JL 12w7 powered by 1000/1
- Morel Hybrid fronts
- Morel Tempo Rear
- Zapco C2K 6.0, Ref 360.4, sp-4, 30 band EQ
- Pioneer D3
- Autometer Nexus series Gauges

And looks like this...
http://g35driver.com/forums/members/...14829-dash.jpg
http://g35driver.com/forums/members/...4830-seats.jpg
http://g35driver.com/forums/members/...827-system.jpg


-Engine

Before I got the car, I had a plan to build a widebody showcar.
APR widebody to be exact. I fell in love with the bodykit I had to get the car lol.
BUT, Any show car without Go mods is not for me. :rolleyes:
So, I shopped around to find a good/reputable shops in the Tristates to help me to get my project going. And found VinnyTen Racing in NY.
Then, I put on some parts...

-VTR Stage 3 Fully built Engine containing:
Darton M.I.D Sleeve
ARP Studs kit
CP Pistons
ACL/Calico Bearing
Cometic Head gasket
Carrilo H beams w/WMC bolts
Nismo Crank, Oil Pump
Ported and Polished Heads
Titanium Lower Retainers
Dual Single Valve Springs Etc...
http://g35driver.com/forums/members/...gine-build.jpg
-HKS Hi-Power Exhaust system
http://g35driver.com/forums/members/...e14807-hks.jpg
-Stoptech 14" front/Rear Brake kits
-KW v2 Coilover
http://g35driver.com/forums/members/...ptech-kwv2.jpg
-Eibach Sway bar
http://g35driver.com/forums/members/...14806-sway.jpg
-JWT700BB Twin Turbo Kit
http://g35driver.com/forums/members/...-engine-v1.jpg

After all the Go Mods done to it. I little Photoshoot Before Cosmetic Surgery.
http://g35driver.com/forums/members/...e14800-ps1.jpg
http://g35driver.com/forums/members/...e14805-ps3.jpg
http://g35driver.com/forums/members/...e14801-ps2.jpg

- The Beginning of the WideBooty!!!

After all the go mods were done, I had a very little fun driving the car due to the break in period, And a show schedule I wanted to make.
So my sleeper looking G was taken to Bodyshop and all the Body Killing Dust project was begun.

My initial Build included:
- APR Wodebody, Molded G2 Trunk Spoiler, Molded Front Grill, Painted Taillights

All the test fittings, Fiberglassing, Sanding almost made me give up lol.
Maybe it's just me but the APR kit I got had a HORRIBLE fitment.
Atleast that was the impression I got. :(
http://g35driver.com/forums/members/...4792-front.jpg
http://g35driver.com/forums/members/...front-side.jpg
http://g35driver.com/forums/members/...re14798-17.jpg
http://g35driver.com/forums/members/...14794-rear.jpg
http://g35driver.com/forums/members/...re14797-16.jpg

Anyways, after whole lot of inhaling dust...
http://g35driver.com/forums/members/...fore-paint.jpg

And my choice of color was... Lambo white with HOK Red/Diamind Flakes.
I wanted it to stand out a lil bit from the other white cars. And it did in person. (few of the guys saw my car last year at various HIN shows.)
But it looked stock IP on the pics which was a BIG turn off for me.
:(

Anyways, pics talk louder than my words...
My first show @ HIN BOSTON
http://g35driver.com/forums/members/...hin-boston.jpg
@ Carisle, PA
http://g35driver.com/forums/members/...31-carisle.jpg
@HIN OH (It was a fun drive 10 straight hour. No Blue tape lol)
http://g35driver.com/forums/members/...14802-ohio.jpg

Then.... Switched out a few things...
Like Coilover switched from KW v2 to JIC a2.
Powdercoated pipings, Manifold, Rims....
Stoptech to Project MU...
@HIN NY
http://g35driver.com/forums/members/...-v1-hin-ny.jpg
@Wheel Concept Show
http://g35driver.com/forums/members/...820-v1-wcn.jpg
http://g35driver.com/forums/members/...e-dress-up.jpg

Then I had a few month between the show schedule, so I decided to spice it up a lil bit and more extreme than VIP.
So started cutting out some parts and molding things....
and it was the Beginning of V2 and went EXTREME!!! (inspired from Drift cars)

-Hood
http://g35driver.com/forums/members/...14813-hood.jpg
-Fender
http://g35driver.com/forums/members/...812-fender.jpg
- Built up around the Sides/ Front/Rear Bumper to Wrap the wheels more. (Making it more rounded than Straight)
- Rear Quarter/Side
http://g35driver.com/forums/members/...-side-rear.jpg

And...........................Last but not Least
NEW PAINT!!!!!! PPG Custom Mixed 3stage Lime green with Blue/Green Pearl
http://g35driver.com/forums/members/...re-graphic.jpg
I know it looks wierd huh?
Well this color doesn't look that good in picture I donno why? :(
But It's got the Blue/Green Pearlcent to it so if you see it in person,
It's not THAT nasty lol.
http://g35driver.com/forums/members/...4790-front.jpg



NOW.....


I've made a few changes since the new paint job.
- Graphics
http://g35driver.com/forums/members/...-v2-hin-nj.jpg
- APR GTC300 Spoiler (AKA my new lunch table lol)
http://g35driver.com/forums/members/...in-nj-rear.jpg
- Carbonetics 2way LSD
http://g35driver.com/forums/members/...s-2way-lsd.jpg
- Nismo Diff Cover
http://g35driver.com/forums/members/...diff-cover.jpg
- Zeal Coilover
http://g35driver.com/forums/members/...14825-zeal.jpg

And More Engine Bling mods aloing with lil more HP!!!!
- ARC Strut, Caps, Catch Can
- Polished Manifold, Pipings, Greddy Intercooler
- Greddy TI-C Exhaust, HKS BOV, JWT Cam, CJ Fuel system with Twin Pump Setup
http://g35driver.com/forums/members/...nal-engine.jpg

And making about 650whp!!!! on high boost.(22~23psi)

http://g35driver.com/forums/members/...14789-dyno.jpg

Like I said in the beginning, It's NOT DONE! and more stuff is in the works.
BUT I'd like to say Thanks to All my Sponsors who helped me get here.
Metro Body : For Providing excellent Body Work, and Following my tight Schedule. (Now you should know 1day before show is Leo's day lol)
Falken Tire : For providing me a great set of Tires, and inviting me to great events and VIP hospitality!
Vividracing : For getting me the all the parts and making a great deals for Me.
Vinnyten Racing for Excellant Craftmanship and service, and Countless sleepless nights to get my car done intime.

And My teammates @ TWCompetition

and thanks to the friends
-Glex25 for crawling under my car lol
-da mayor for looking out and hooking me up with headlights. :)
-Rookie for answering my questions.
and many more that helped/inspired me to get to this level, I THANK YOU!

http://g35driver.com/forums/members/...ollingshot.jpg
Stay tuned... I will try to get some more pics sometime soon.(As soon as the weather clears up)

Car looks great

Outside of the box. I like it! TWC always representing!

that graphic is nuts, and clean

very nice build overall but you need wider wheels to complete the look are you after.

awesome ride, seen it at Vinny Tens Dyno day/barbecue last year, sweeeeeeeeeet...

Car is extremely clean yet tastefully over the top all at once, and I love it. Well done sir!

Thanks for the Kind comments. :)
I'm just gald my project is coming along in one piece.

Wheels are in the works. hehe.
But actually went narrower. (The current HRE is 12.5" with 315 tire)
I think I need to have front to come out lil more and Bigger diameter overall.
I def need more professional pics taken. :(
If you are in Tristate Area and a good at taking pics. PM me. :)

man this just lets me know how broke I am :( car looks good

Nice to see a build that was followed through. Came out clean.

Morel, Zapco and.... JL... John at Ultrasounds definitely did that sound system.

$$$$$$$$$$

Im not usually a fan of cars that over the top but I love it (minus the rear wing)

That thing is over the top in all the right ways

Its so original.
Very sick

better pics of the graphics would be nice.

Its sure growing on me :thumbup: i love HREs but I agree they need to be more aggressive fitment I can't wait to see what you are getting next.

SICK!

PM'd!

saw this car in person....I love it!

A lot of time and dedication went into it, I like the car a lot, thanks for sharing the whole build up!

+1

Felt you lose your euro clean and simple plan half way through the build, but pulled through at the end with a great finished product.