ChriZTT's Pikes Peak White 350Z Build Thread
 

I want this thread to be a place were I can keep a log of my build, share progress pictures, and interact with fellow forum members. I've been on the forms consistently since August of 2005. I bought my Z in May of 2006, and I've used the forum as a reference for all things Z related over the years. The grand majority of my time here has been as a consumer of information (just look at my post count lol). So I'd like to finally introduce myself and my Z to the community.

My name is Chris, and the following is a synopsis of the last 8 years of owning my PPW '06 Z.

Here's the first picture of the Z after I brought it home from the dealer and washed it.

Attachment 407574

PHASE ONE: Blank Canvas. Oh the Possibilities!
It wasn't long before I started to change things just for the sake of changing things (hind-sight is always 20-20). I started with the suspension thinking that on my small budget I could increase performance and the overall aesthetics of my Z. I first purchased Tein Basic Coilovers. Later, I got Cusco Front A-Arms and Rear Camber Arms to fine tune the alignment. I finished it off with Stillen front and rear sway bars. Looking back, the sway bars made the biggest difference to the handling characteristics of the car over any of the other suspension components I added.

Other changes worth mentioning included: JWT Pop Charger Intake, S2000 antenna, Nismo Ti shift knob, and a genuine Fairlady Z badge, which I throughly enjoyed. It might be frowned upon today, but back in '06 I was getting all kinds of positive feedback on the badge.

Tein Basic Coilovers
Attachment 407575

Cusco Front Upper Arms
Attachment 407576

Rear Camber Arms
Attachment 407577

JWT Pop Charger
Attachment 407578

Attachment 407579

Attachment 407580

Attachment 407581

PHASE TWO: Back to Basics.
I was on that setup for a little over a year. However, spend enough time reading and learning about any topic or hobby and your perspective will eventually mature. The more I learned about suspension and chassis tuning, the more I realized that I would need a much larger budget to really improve upon the stock suspension. I decided to sell off the aftermarket suspension parts with the exception of the Stillen sway bars (which I still have on the Z to this day), and return back to stock form.

I took a break from buying parts and simply focused on driving, maintaing the car, and learning as much as I could about the direction I wanted to take with my future build (more on this later). During this time I refurbished the interior plastics on the doors and the waterfall. This was my first attempt ever at a project like this. It was a great experience and I was extremely satisfied with the results.

Attachment 407582

Attachment 407583

Attachment 407584

Plastics after I removed OE coating.
Attachment 407585

Attachment 407586

Attachment 407587

First few coats complete.
Attachment 407588

Attachment 407589

Got bored one afternoon and decided to remove the subwoofer mounting plate behind the drivers seat. Fun way to spend an hour or so in the garage.

Attachment 407590

Attachment 407591

Attachment 407592

PHASE THREE: The Quest for more Power!
When the urge to start modifying came around again I figured I'd switch my focus towards bolt-on power modifications. Unlike the suspension, which requires a larger array of pieces that then need to be tweaked correctly in order for them to work harmoniously together, bolt-on mods are simple and very straight forward. I started with the Motordyne MREV2 lower plenum and their 5/16th's Iso-Thermal plenum spacer. This was the first of many DIY installs on the Z.

(Note: pictures are of the OE lower plenum, not the MREV2. I guess I was too excited to jump in and go for a spin that I forgot to snap some pics of the new go fast goodies, oh well :confused:)
Attachment 407593

Attachment 407594

I followed up the plenum mods with a Motordyne Dual Shockwave TDX1 cat back exhaust. The change in sound and reduction in weight really added to the overall driving experience of the car. Eventually added Motordyne ART pipes to finish off the exhaust setup. The install of these parts was really straight forward. The most challenging part was only having two hands.

Motordyne Shockwave TDX1
Attachment 407595

Attachment 407596

Motordyne ART Pipes
Attachment 407597

OEM Catalytic Converters
Attachment 407598

Attachment 407599

Finally wrapped it all up with an UpRev Dyno tune at HP Logic. The baseline showed a lean air/fuel mixture (huge surprise... NOT really :icon38:). After tweaking the fuel to match the increased air flow, there was an instant noticeable difference in how smooth the power delivery through out the entire rev range became.

Attachment 407600

So thats mostly it! Your all caught up! But the journey has only just begun. I'd like to close this first post by stating the intent of my build as I see it at this point in time. Without giving too much away, the focus is to build a track worthy, daily driven Z. Making sure to have a ton of fun along the way. If you've made it this far, I'd like to thank you for taking the time to read my story. More to come real soon!

I'll leave you with a little tease...

Attachment 407601

StopTech Brakes.
 

So I picked up a set of ST-60's for the front, and ST-45's for the rear. They both use a 335mm X 32mm sized rotor, so they are pretty massive to say the least. Best part is these rotors weigh less than the stock (front) ones they replaced!

Attachment 407568

Install Day.
Attachment 407569

Before...
Attachment 407570

After!!
Attachment 407571

I was able to get the ST-60's on without any issues. The ST-45's are waiting for new pads to arrive before they go on. So an update is pending on that.

I replaced the Hawk DTC-60 pads yesterday with the StopTech Street pads. The DTC pads had amazing initial bite, but were too noisy because I couldn't get them up to temp on the street.

Attachment 407572

Attachment 407573

My wheels are caked in brake dust from the race pads, so I'll get some pictures up with the wheels on after I get around to cleaning the car.

I always get a partial chub from Motordyne ART pipes! So sexy!

Quality build sir, well done! Curious to see what color are your bbk caliper.

Nice build, keep it up.

TDX1. Green chucks. Spider-Man. Sign me up.

gat damn in on juan

Nice progress! Sub'd for updates.

I get that same feeling every time I cold start the car :thumbup:.

Thanks for the kind words! As for the color of the kit, I'll say this, it wasn't what I originally planed on, but I couldn't say no to the trophy kit caliper brackets that this particular kit came with :icon21:.

Thanks! I appreciate it.

This made me laugh out loud!! Thanks Advan, BTW I'm really digging your new look with the SSR's! Great choice!

Thanks! I don't think I'll disappoint.

Updated post #2 with new content.

Suspension v2.0
 

Starting to piece together the new suspension setup. The KW ClubSport Coilovers are the foundation I'm going to be building the suspension around.

Attachment 407257

Also got a few SPL goodies to complement the KW's.

Attachment 407258

Front A-Arms
http://i9.photobucket.com/albums/a52...t/IMG_1773.jpg

Rear Camber Arms
Attachment 407259

Eccentric Lockout Kit
Attachment 407260

And to round it all off an SPC Toe Bolt Kit.
Attachment 407261

Down the road I'd like to add front and rear end-links, as well as solid subframe and differential bushings. For those of you who have corner balanced your setups, how necessary or beneficial is it to add adjustable sway bar end-links? How do the end-links aid in the corner balance process?

Nice progress! Where in FL?

Chris

pfff you dont need that stuff..just send it to me

Thanks Chris! I'm down in Miami.

I was just thinking the same thing, but you have to be more specific. Where in the valley exactly? :bowrofl:

Brake pads for the ST-45 rear calipers came in yesterday. Hopefully I can get the install done on Saturday.

Attachment 407070

Attachment 407071

Project Kics R40 lugs.

http://i9.photobucket.com/albums/a52...t/IMG_1819.jpg

The only remaining items are the wheels and tires. The tires (Hankook V12's) should be here this afternoon. The only thing I'll say about the wheels right now is that they are LIGHT... very light weight. Update on that is coming soon.

4PM Update
Tires have arrived!
http://i9.photobucket.com/albums/a52...t/IMG_1832.jpg

very cool man, although a bit confused. You've picked up KW clubsport coilovers and stoptech bbk, which both say track car, but the hankoook v12s definitely do not

Thanks! I see your point. The Hankook V12 is in fact a street tire, no doubt. My Z is still very much a street car as well, so the V12's will serve me just fine for the time being.

Rear Brakes Installed!
 

So Saturday I got to work and installed the ST45's. Compared to the front, the rear took a little more finesse. Over all it just required a bit more trimming and grinding to get every thing to fit perfect.

Attachment 406920

http://i9.photobucket.com/albums/a52...t/IMG_1859.jpg

A before and after of the left rear dust shield.
Attachment 406921

Attachment 406922

Attachment 406923

Completed right rear assembly.
Attachment 406924

Caliper to wheel clearance on the rear left.
Attachment 406925

Attachment 406926

Sub'd. Quality looking build so far. Nicely done man.

Wheels
 

Lightweight has always been at the top of my priorities list when looking at possible wheel options. My brake setup requires an 18" wheel minimum to avoid clearance issues, therefore 17" wheels could not be considered. RPF1's seemed like a logical choice given the price point and weight, but I wanted something a bit different.

I decided on the WedsSport TC105N. Specs are 18x9.5 +10 in the front, and 18x10.5 +12 in the rear. The front wheels weighs in at ~17.6 lbs each, and the rear wheels weighs in at ~18.4 lbs each. I'm not sure you can do much better than that on an 18" wheel.

Attachment 406785

Attachment 406786

Cleaned them all up.
Attachment 406787

Attachment 406788

Attachment 406789

Attachment 406790