I am waiting for an estimate from Pete @ intense.
|
How much confidence do you have in your machinest? I've found they are generally the best mechanics out there, but also keep in mind nothing beats a shop with tons of experience on your platform.
|
The machinist was chosen by the mechanic. It took him over a month to get the motor where it is now.
The first shop I called when told who did the machine work said he would need the work checked before he accepted the job. :( I did this a minute ago: http://i20.photobucket.com/albums/b2...o/84dc0f32.jpg Frontier coolant outlet cover. PROGRESS!!!!!!!!!!!!!!!!!!!!! |
hope everything works out for you man!
|
A good builder should check measurements as they go anyway, if for no reason but their own piece of mind.
GL with your build. I will be looking at doing something similar in the future. |
seems like im not the only one with a slow build now ;)
|
Sorry yours has slowed too. Can you give me the part number for the oil filter stud you used to delete the oil cooler please?
Thanks. |
why delete the oil cooler?
|
Because I am adding a real one and the O ring on my 22K motor was seeping.
|
ah, gotcha, i was hoping you werent just removing it altogether
|
Nope would not do that. I should have said IS seeping. Nissan tried to blame the miniscule seep for the oil consumption.
|
im deleting mine all together, but will eventually add an aftermarket oil cooler setup in the near future. i'll get the pn for ya tomorrow but i looked it up under an I30. im hopin my heads get finished up by the weekend tho. i took a similar pic of the water outlet on the block too. check my thread again lol
|
I searched & searched and could not find the darn thing.
Thanks. |
Updates?
|
Sorry forgot about this thread.
The thrust washers I got had only block side, had to buy another set. And a few new engine progress pictures. This is the Thrust washer I was missing. http://i20.photobucket.com/albums/b2...o/70923646.jpg http://i20.photobucket.com/albums/b2...o/972bd489.jpg |
Hows the build coming along with the machinst?
Seen in another thread you bought the Hr oil stud, guessing your removing the factory cooler/warmer? |
Haha so u got jipped on the acl thrust washers too? Lol seems we have quite a similar build process goin on. Im STILL waiting on my heads to be finished with the port n polish unfortunately BUT they are almost done. Will be quite a crunchtime to get it done n tuned before zdayz in 2 weeks.
|
Amazing huh?
I'm hoping for completion in under a month. Better slow but moving than nada. :P |
sure is. lol luckily the dude i bought mine from sent me another set (oe brand) that were packaged correctly....BUT i ordered oem ones while i waited. so i have a set for sale :)
im HOPING to have the motor together by the weekend IF my heads get finished in the next day or so. its crunch time! |
No fun.
Bottom end is ready for the pistons. All bolted up! http://i20.photobucket.com/albums/b2...o/88163bb5.jpg http://i20.photobucket.com/albums/b2...o/1c56a36d.jpg http://i20.photobucket.com/albums/b2...o/74ca6d22.jpg http://i20.photobucket.com/albums/b2...o/56f12174.jpg http://i20.photobucket.com/albums/b2...o/8d326808.jpg |
All times are GMT -8. The time now is 05:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands