Originally Posted by stepson
Damn, i might be, but i'd need something wider than my stock rims. I was looking at a set of TSWs, but i'd need to pick up your tires, and then somehow get a set of tires and a set of rims to a tire place ... hard enough typically, almost impossible in a Z roadster ;)
|
heres a couple variations of the first ones i posted, anyone got anything to add or another design?
Attachment 119129 Attachment 119130 |
Originally Posted by helldorado
You're in the Four Seasons! I'm at the Embassy Suites in Cincinnati! We could've met for dinner. :icon17: My flight got canceled this evening because of that stupid rain. So I'm actually flying to BWI tomorrow, and the AAM guys are meeting me with my car so I can drive it home. Saves them the cost of transporting it and I get my car back sooner.
That'll be sweet. You taking it to Wheel Collision Center in Bath? Let me know how that turns out, I want to take my stock 19's there at some point to get them powdercoated in either black gloss or black chrome. Chewed one up last year and I haven't fixed it yet, so I figure I might as well get it fixed and done up nicely. Just because they're winter rims, doesn't mean they can't look good! :icon39: BTW, anybody in the market for new summer tires? I have a set of GS-D3's sitting in my garage I'm about to relist. 255/35/19 and 275/35/19. I blew one out with only 800 miles on it, stupid road hazard. Replaced it under warranty but I had PS2's put on, so they're sitting in my garage right now. If anybody wants them for cheap, I can bring them to the garage some time. |
Originally Posted by KelekonaKustoms
heres a couple variations of the first ones i posted, anyone got anything to add or another design?
Attachment 119129 Attachment 119130 |
GUYS:
Rick: did you say you were gonna pick up a wrecked car to yank the engine out of to build? if so, can you take on some extra buyers and part out the car? I need the following parts: Stock brembos Steering wheel window trim door sills seat covers so, if you are I'll chip in!!! there are more parts I need, but not sure yet. |
Originally Posted by Motormouth
GUYS:
Rick: did you say you were gonna pick up a wrecked car to yank the engine out of to build? if so, can you take on some extra buyers and part out the car? I need the following parts: Stock brembos Steering wheel window trim door sills seat covers so, if you are I'll chip in!!! there are more parts I need, but not sure yet. |
nah, the finish wore off the steering wheel (common problem... apparently it reacts with skin oil and degrades the clear) door sills, actually just one. the clip on the back is busted. seat covers.... common side bolster wear problem
brembos, I don't have at all and WANT them, can't afford a BBK. window trim again, a nother common failure, clip snapped and it costs, oh 280 bucks to fix at the dealer!!! nowaiiiii!!!!!!! |
Originally Posted by Motormouth
nah, the finish wore off the steering wheel (common problem... apparently it reacts with skin oil and degrades the clear) door sills, actually just one. the clip on the back is busted. seat covers.... common side bolster wear problem
brembos, I don't have at all and WANT them, can't afford a BBK. window trim again, a nother common failure, clip snapped and it costs, oh 280 bucks to fix at the dealer!!! nowaiiiii!!!!!!! |
well, if everyone needs different parts.... the cost goes down for everyone, rick only wants the engine and drivetrain, that leaves everything else for us : )
if anyone else is in, we should get a list together for what everyone wants./ AND MY CAR HIT 50k!!!!!!! WOOT |
if you end up picking up an 06 id be interested in the head and tail lights. if its a 03-05 then door panels
|
an 06 would be tight. but alot more expensive.. but then the engine would match what Rick needs... since he's got an 06, and that is the revup, etc...
|
I need the rear assembly, looking for those 3:55 gears to make my monster meaner!.........oh yeah and a rerar bumper cover too!
Jerry |
https://my350z.com/forum/exterior-and-interior/217215-nismo-v2-bumper-pics-gb-bumper.html
oh god, check out out of the box fitment for my bumper!!! |
Jerry: I don't know if you remember Deviant Creations from the Controlled Insanity meet (red vette on nitrous?) doug, well he owns a powdercoating company and is hooking me up for my rims!! so everything is set. he is in merchanville so the turn around time is like 4 days!!! it'll work out perfectly.
a LOT cheaper than the other places. and he's doing the lettering |
Hey, I dissapear for a day and you are already stipping my salvaged car! (LOL)
Just got back to my hotel room and had a blast at the speedway. They allowed about 30 cars at a time on the track and you get to drive for two laps at whatever spped you want. I was WOT almost the entire time except to avoid slow pokes and cop cars sitting high up on the banks. But those are crazy, they are high. I never realized how cool it would be. This would be a great trip for the group next year! |
yeh you sounded enthused!!\
and so you ARE getting a wrecked z? |
I would be up for that, we should check out that day at the Dragon event next year, I forget what state its in but would be a good time!
|
JUST FOR YOU RICK: WORK S1 3pc 19's
https://my350z.com/forum/wheels-and-tires/217283-gloss-black-work-s-1-3-piece-on-super-black.html |
Originally Posted by Vader007
I would be up for that, we should check out that day at the Dragon event next year, I forget what state its in but would be a good time!
|
Still a ways off, but if we want to hit it up, the ECZA is holding their fall Meet/Show in Concordville off 202 on the 21st of Oct. Its across the street from McKenzie's Brew Pub which is a good place to go drinking afterwards!
http://forums2.freshalloy.com/showthread.php?p=1330838 |
All times are GMT -8. The time now is 02:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands