To set the record straight, for Sharif and Philthy
Im do not want to get into a debate or a hate fest between Sharif, and Philthy, however it seems there has been some bad information floating around from their mouths.We have been know to debate on the board for some time, however as of late for whatever reason the topics have been getting really disrespectful on both ends and is out of control at this point.
Contrary to their information that Sharif has recieved from whatever sources, I assume Phil, my car does not have a blown headgasket, it has not experienced headlift, and it is and always has been up and running fine. Seems as if the two of you have been spreading some pretty nast rumors about my shop as of late, and we just want to set the record straight..On a previous thread, sharif asked for a video of my car on the dyno to prove the fact it was not overheating or headlifting. Here they are, as I am a man of my word..
Factors:
Dyno Dynamics Dyno
Correction- 0%
Standard Atmospheric correction
Boost-16.5 on pump gas!!!
AF, VERY RICH with a ton of timing pulled out
HP 500whp (499.9 to be technical)
Dyno Jet would see about 560whp on 93 octane
Not to bad for a blown motor huh fellas?
The car did pick up some knock up top near 6000 rpms and pull some timing.
Now I ask Sharif to be a man of his word and publicly admit you were wrong with no excuses so we may all get on with our lives..
The vids are uploaded awaiting moderator approval..
Vids up!!
http://www.boosted350z.com/Videos/MRC_Sharif.wmv
Contrary to their information that Sharif has recieved from whatever sources, I assume Phil, my car does not have a blown headgasket, it has not experienced headlift, and it is and always has been up and running fine. Seems as if the two of you have been spreading some pretty nast rumors about my shop as of late, and we just want to set the record straight..On a previous thread, sharif asked for a video of my car on the dyno to prove the fact it was not overheating or headlifting. Here they are, as I am a man of my word..
Factors:
Dyno Dynamics Dyno
Correction- 0%
Standard Atmospheric correction
Boost-16.5 on pump gas!!!
AF, VERY RICH with a ton of timing pulled out
HP 500whp (499.9 to be technical)
Dyno Jet would see about 560whp on 93 octane
Not to bad for a blown motor huh fellas?
The car did pick up some knock up top near 6000 rpms and pull some timing.
Now I ask Sharif to be a man of his word and publicly admit you were wrong with no excuses so we may all get on with our lives..
The vids are uploaded awaiting moderator approval..
Vids up!!
http://www.boosted350z.com/Videos/MRC_Sharif.wmv
Last edited by Julian@MRC; Apr 9, 2007 at 08:58 PM.
Trending Topics
I'll grab my laptop and check it at home...hehe.
Hey Julian, did you video a current newspaper or some current dated material?
And for the record, your intro was way off base. You personallly told me on the phone about the head lift/heater core failure thingy...no more than 3 weeks ago.
Hey Julian, did you video a current newspaper or some current dated material?

And for the record, your intro was way off base. You personallly told me on the phone about the head lift/heater core failure thingy...no more than 3 weeks ago.
Originally Posted by Sharif@Forged
I'll grab my laptop and check it at home...hehe.
Hey Julian, did you video a current newspaper or some current dated material?
And for the record, your intro was way off base. You personallly told me on the phone about the head lift/heater core failure thingy...no more than 3 weeks ago.
Hey Julian, did you video a current newspaper or some current dated material?

And for the record, your intro was way off base. You personallly told me on the phone about the head lift/heater core failure thingy...no more than 3 weeks ago.
Originally Posted by captj3
Julian you have to stop letting them bait you. They do this all the time. Just chill you'll live longer...lol
dude - I've been keeping away from you, and you're the one that keeps pulling me back into your baby crap... I haven't replied to your PM or any of your posts and yet you still want to start up with me...?
I'm off torrow, let's just race already and put this to rest...
I'm off torrow, let's just race already and put this to rest...
Originally Posted by Philthy
dude - I've been keeping away from you, and you're the one that keeps pulling me back into your baby crap... I haven't replied to your PM or any of your posts and yet you still want to start up with me...?
I'm off torrow, let's just race already and put this to rest...
I'm off torrow, let's just race already and put this to rest...
https://my350z.com/forum/showpost.ph...0&postcount=50
https://my350z.com/forum/showpost.ph...4&postcount=54




each other