Proven on the track and the street.

https://cimg0.ibsrv.net/gimg/my350z....72fa081474.jpg

found this post today stating that you have a new version and apparently you have added a dust boot to the heim joint. can you confirm?
https://cimg2.ibsrv.net/gimg/my350z....6bd3a55f85.png

Yes, this is correct. We will have updated pictures soon.

thank you. this has solidified my choice to purchase your product over kinetix. thanks again.

Your welcome. You can give us a call to purchase as well. 770-838-7777

-Rod

Here is an updated picture.

https://cimg6.ibsrv.net/gimg/my350z....c897bd24e6.jpg
https://cimg7.ibsrv.net/gimg/my350z....6b994df226.jpg

Here is Jace's 350z on Z1 front control arms.

https://cimg7.ibsrv.net/gimg/my350z....eea0ce510.jpeg

Upgrade to the Z1 front upper control arms.

https://cimg2.ibsrv.net/gimg/my350z....4ccd0d13c8.jpg

One of the best options for control arms.

https://cimg8.ibsrv.net/gimg/my350z....d2cf5346e9.jpg

Z1 350z Camber/Control arms in stock.

https://cimg7.ibsrv.net/gimg/my350z....ce31265e6f.jpg

Control arms in stock.

https://cimg0.ibsrv.net/gimg/my350z....fb9bcd7756.jpg

Possible to get the same price on my350 using the main z1 site? It's listed as $268 there.

I’m Having clearance issues with the ball joint there the race version as well I’m not sure what’s going on before I start modify the wheel well I’d like to see if maybe there set up wrong? I’m going the alignment rack Saturday to see if it’s out of spec but its bashed up the inner seem on the fender also there on a 2003 Sedan early model thanks in advance

Perhaps a silly question, but are you sure they are not upside-down? They should be slightly bent downwards, but I could see them hitting the wheel well if they were incorrectly installed. Photos would help with possible identification of the problem.

I believe they have a slight tilt downward https://cimg9.ibsrv.net/gimg/my350z....d1818ecbd.jpeg

Can you jack the car up to take a better photo? It's difficult to tell what's going on.