MY350Z.COM - Nissan 350Z and 370Z Forum Discussion

MY350Z.COM - Nissan 350Z and 370Z Forum Discussion (https://my350z.com/forum/)
-   VQ35HR (https://my350z.com/forum/vq35hr-479/)
-   -   Projected HP output for Gamer's HR build! (https://my350z.com/forum/vq35hr/490440-projected-hp-output-for-gamers-hr-build.html)

Lakeside 06-14-2010 03:08 PM

Projected HP output for Gamer's HR build!
 
I have received alot of PM's on Gamermodz's build and how inflated his expected output goals are... Some who have seen the car in person during the build process. So lets ask the membership what their opinion is :dunno: We will keep this on the honor system, being I have no proof of what components are being used on this VQ35HR build.

So here is his list.

Motor:
VQ35HR Stroked to 4.2L
Greddy Twin Turbos (Two 20G Turbos) Ported & Polished
Arias Pistons
Brian Crower Rods
Brian Crower Billet Crank
Ferrea 2mm over sized competition valves, springs and titanium retainers
Ported, Polished and Reflowed Heads (Flowed 37% more than stock!)
Engine completely balanced and blueprinted
Tomei Cams (verifying valve clearance so they are unordered right now)
Block sleeved by Darton
Custom Designed 6061 T6 Aluminum Twin Throttlebody Plenum
All components have been Cryogenically treated in an SubZero Cryo unit
Injector Manufacture to be determined

Exaust:
Ported and Polished Headers
Ceramic Coated Headers and Exaust System
Straight Exaust Dump off with electronic valves for routing through the Greddy Ti-C exaust system while on public streets.

Suspension:
Tein SRC Dual Dampening Coilovers with External Resevoirs
2 Tein Electronic Dampening Force Controller (EDFC) Units cockpit mounted
Tein 16kg Springs Front and Rear
Tein Tie Rods
GTSpec 2 Point Rear Lower Brace
GTSpec Front 4 Point Ladder Brace
GTSpec Front Lower Tie Brace
GTSpec Rear Lower Tie Brace
GTSpec Rear Lateral Arm Brace
GTSpec Fender Braces
Hotchkis Adjustable Sway Bars
PowerGrid Swaybar Endlinks
SPL Adjustable A-Arms
SPL Adjustable Rear Toe Arm
SPL Adjustable Rear Trailing Arm
Stillen Core Support Bar
Whiteline Front and Rear Urethane Bushings
Whiteline Rear Traction Bushings
Whiteline Sub-Frame Bushings
Custom Roll Cage by SnR Performance

Brakes:
Greddy 8POT Front Calipers
Greddy 4POT Rear Calipers
Greddy 385MM Slotted Front Rotors
Greddy 335MM Slotted Rear Rotors
Greddy Stainless Steel Brake Lines
Stillen Master Cylinder Support Bar

Cooling and Fuel:
Altered Atmosphere Return Fuel System
Greddy Performance Radiator
Greddy Oil Cooler
Greddy Air Diversion Plate
NISMO Thermostat
Dual Walbro 255 fuel pumps
Custom Brake Cooling Duct System
ARC Belly Pan
Rear diff cooler
Transmission Cooler


Transmission:
OS Giken Triple Plate Racing Clutch
OS Giken Racing LSD
Rear Axle Brace

Electronics:
Haltec ECU with all sensors
Greddy Infometer Touch Complete System with all sensors
Greddy Profec B-Spec II Boost Controller
Greddy Profec Remote Switch
DashDaq Datalogging System with Accelerometers
Stillen Grounding Kit

03threefiftyz 06-14-2010 03:11 PM

I like pizza.











He is banned now.....probably going to be locked.

Lakeside 06-14-2010 03:14 PM

lmao! D'oh

Anyhoo I was hoping to set this person straight and see if he had the Ballz to provide his Dyno results in this thread. Also, to protect against rediculous dyno corrections to provide 2-3 differant dyno sheets. Time to return to earth buddy.

Zim

Hexxus 06-14-2010 03:17 PM

Anywhere from 0-infinite horsepower, but not likely to go above 650hp.

Nexx 06-14-2010 03:18 PM

320whp

on a side poll, how much poop will i poop out tomorrow if i eat mexican buffet tonight.

1. 2 to 4 ounces
2. 5 to 10 ounces
3. 1 pound to 1.5 pounds
4. 1.6 to 2.0 pounds.

:icon16::icon16::icon16:

03threefiftyz 06-14-2010 03:20 PM


Originally Posted by Nexx (Post 8456718)
320whp

.......it's an HR though :icon8:.........

Lakeside 06-14-2010 03:22 PM

It wouldn't be Nexx if he didn't say 320 whp. After all, he is the HR hater!

03threefiftyz 06-14-2010 03:25 PM

214whp.

aloh 06-14-2010 03:32 PM

You didnt put an option for 1,000,000,000 JIGGGAWATTS

03threefiftyz 06-14-2010 03:35 PM

I wish we could get clarification on what flux capacitors/muffler bearings/and blinker fluid he is running.............

Nexx 06-14-2010 03:48 PM

so he's gonna have ported, polished and ceramic coated headers with twin turbo setup? :icon8:

Exaust:
Ported and Polished Headers
Ceramic Coated Headers and Exaust System

03threefiftyz 06-14-2010 03:50 PM

How dare you doubt him Nexx..............shame on you.

Nexx 06-14-2010 03:53 PM


Originally Posted by 03threefiftyz (Post 8456784)
How dare you doubt him Nexx..............shame on you.

i know i know and why is he pimpin some other dude's car? and why are people PM'ing him not gamerzmod? :dunno:

"we dont care what your friend drives what did you bring?" saying comes to mind. :p

Lakeside 06-14-2010 03:57 PM

This thread will be full of lolz! Subscribed

03threefiftyz 06-14-2010 04:01 PM

In all honesty though.....it will hit 88mph on the dyno and travel back in time.

MDHRZ 06-14-2010 04:18 PM

HR's are slow anyways. Right Nexx?

Why was GamerModz banned?

03threefiftyz 06-14-2010 04:23 PM


Originally Posted by MDHRZ (Post 8456836)
HR's are slow anyways. Right Nexx?

Why was GamerModz banned?

Cause I didn't like him.....:dunno:

Nexx 06-14-2010 04:27 PM


Originally Posted by MDHRZ (Post 8456836)
HR's are slow anyways. Right Nexx?

Why was GamerModz banned?

actually HR is faster just not faster than VHR. ;)

SamSpicer 06-14-2010 05:22 PM

+1 on why did Gamermodz get banned ?

Lakeside 06-14-2010 05:26 PM

For being a Tool Bag :dunno:


All times are GMT -8. The time now is 12:02 PM.


© 2024 MH Sub I, LLC dba Internet Brands