18x10.5 +22 upfront?
I am currently running TE37's 18x9.5 +22 245/40 front
18x10.5 +22 275/35 rear I hate understeer. Anyone running a square setup consisting of 18x10.5 + 22 all around? Im looking to pick up two more 10.5's for the front...and run 285/275 all around if possible....anyone have comments about fitment of this setup up front? Thanks |
I have a 9" +22 up front, and I am lowered about 1.5" and have -2.5 camber. It's very close to rubbing on the outside. VER VERY close. I'd have to vote no on the 10.5" +22 with a 275 in the front.
|
I am running 18x10.5 +15 in the front with 265/35 and I dont rub. I think 275 will fit fine.
|
I'd put 275's or 265's on the 9.5 fronts. I'm running 265 on a 9.5 front with +30 mm offset and I have about 7 mm of clearance before rubbing.
I'd also put 295's on the rear if it were me, the wider the better. |
275/30's should fit no prob on your front wheels, and sway bars will also help even more.
|
What parts do you have on your car, there are cheaper ways to get rid of understeer.
|
it does fit but you need to camber the car some more in the front with camber arms and change tire size. i played around with this on my old TE37 time attacks
this is what will work 265.30.19 +22 -3.5 camber (around) 275.35.19 +22 -3 camber the rear can go 285.35.19 but you will have a bigger side wall in the rear and will look funny compared to the fronts. the 275/35 is better. doet. |
Sry I forgot to list mods...Im running hotchkis sways on med(f and r) and lowered on sportlines(1.2 inches) w/ stock shocks....I use rt615s now but there shot so its time for new tires anayway...looking at dunlops...
I was hoping to get away with a 285/30 all around but i'll settle for 275's thanks for the replies |
I'm also running 18x10.5 +15 F with 265/35 RT615s. I currently have -2.5 degrees camber up front and I'm dropped on Stance. Have about 2.5" drop. No rubbing. 275/35 might rub without going more negative with the camber but you have +22 so it should be fine. 285/30 You would need more drop and more negative camber. My front fenders are now pulled a little from autox and a drift event. With only a 1.2" drop, I don't know how you'll be able to look at the wheel gap.
|
If your just trying to get rid of the understeer just change your sways to soft in front and stiff in rear and you should be good
|
You should be fine, as long as you don't have Brembos.
|
Originally Posted by Triple8Sol
(Post 6381910)
You should be fine, as long as you don't have Brembos.
?....i have stoptechs... |
i have -2.5 camber and running 265/30/19 on a 9.5 rim with +7 offset. No rubbing (kinda).
|
DOET!
|
sorry to hi-jack but i guess you can fit the stock grand touring rims in the front. the 19x10's? its only a 30 offset.
|
i have 19x8.5 +22 in front :dunno:
edit: 235/35/19f x 275/35/19r |
i dont know about 10.5 in front i run a 19x10 in front with 25offset and a 245/35 tire. =/ lowered on gf210s
|
The reason why I am intersted in going with 10.5 front and rear, with the same tires size, is so I can rotate them...
If Im not mistaken...doesn't the M-Works 350Z run 10.5 all around with 285/30/18 ? |
Originally Posted by prstriker04
(Post 6400292)
i dont know about 10.5 in front i run a 19x10 in front with 25offset and a 245/35 tire. =/ lowered on gf210s
|
All times are GMT -8. The time now is 02:04 AM. |
© 2024 MH Sub I, LLC dba Internet Brands