MY350Z.COM - Nissan 350Z and 370Z Forum Discussion
So shiny!
So shiny!
0 2022/09/19 01:10:10
Like new!
Like new!
0 2022/09/19 01:10:12
0 2023/02/01 19:51:47
MD TDX2 XYZ Pipe
MD TDX2 XYZ Pipe
0 2024/03/12 22:54:39
MD TDX2 Axle Back. (Camera guy seems to be tipsy).
MD TDX2 Axle Back. (Camera guy seems to be tipsy).
0 2024/03/12 22:54:49
MD TDX2 Mid-Pipe
MD TDX2 Mid-Pipe
0 2024/03/12 22:54:52
OEM Pulley removed.
OEM Pulley removed.
0 2024/03/12 22:56:23
Fluidampr installed. (Check previous post for side by side Fluidampr vs. OEM pulley)
Fluidampr installed. (Check previous post for side by side Fluidampr vs. OEM pulley)
0 2024/03/12 22:56:26
The extend of the bushing failure.
The extend of the bushing failure.
0 2024/03/12 22:58:29
Pressing out the factory bushings.
Pressing out the factory bushings.
0 2024/03/12 22:58:31
Pressing in the Whiteline bushings with homemade pipe die.
Pressing in the Whiteline bushings with homemade pipe die.
0 2024/03/12 22:58:34
The finished product.
The finished product.
0 2024/03/12 22:58:37
LCA and Brake air guides deflectors installed.
LCA and Brake air guides deflectors installed.
0 2024/03/12 22:58:39
Side view of LCA and deflector.
Side view of LCA and deflector.
0 2024/03/12 22:58:42
0 2024/03/28 13:07:54
0 2024/05/09 23:29:45
Center Waterfalll after curing
Center Waterfalll after curing
0 2024/07/01 23:44:46
Center waterfall front after curing overnight.
Center waterfall front after curing overnight.
0 2024/07/01 23:46:43
Center waterfall top.
Center waterfall top.
0 2024/07/01 23:46:48
Original paint on left. SEM blend match on right.
Original paint on left. SEM blend match on right.
0 2024/07/01 23:46:54
Original on left. Pure Landau Black on right
Original on left. Pure Landau Black on right
0 2024/07/01 23:46:59
My mistake in pure Landau Black. Notice the wrinkles?
My mistake in pure Landau Black. Notice the wrinkles?
0 2024/07/01 23:47:04
0 2024/07/12 20:01:12
Head Unit - Wiring test.
Head Unit - Wiring test.
0 2024/08/12 21:29:41
SWC Posi-taps on factory harness
SWC Posi-taps on factory harness
0 2024/08/12 21:30:46
3.5mm jack from Axxess to Kenwood.
3.5mm jack from Axxess to Kenwood.
0 2024/08/12 21:30:49
The Axxess ASWC-1 brainbox and main wiring.
The Axxess ASWC-1 brainbox and main wiring.
0 2024/08/12 21:30:50
0 2024/08/12 21:32:42
0 2024/09/10 17:37:01
Front View - Notice 4x8mm perimeter bolts
Front View - Notice 4x8mm perimeter bolts
0 2024/10/01 00:03:08
Rear View
Rear View
0 2024/10/01 00:03:10
Side view
Side view
0 2024/10/01 00:03:12
Casing separated, rotor with front case. Note: I removed the pulley 1st, but the rust kept the rotor with the front casing during separation.
Casing separated, rotor with front case. Note: I removed the pulley 1st, but the rust kept the rotor with the front casing during separation.
0 2024/10/01 00:04:21
0 2024/10/01 00:04:23
0 2024/10/01 00:04:25
Home-brew bearing puller. Just a cheap Harbor Freight ball joint separator. Works great!
Home-brew bearing puller. Just a cheap Harbor Freight ball joint separator. Works great!
0 2024/10/01 00:12:09
Bearing removed, I needed to add a longer socket/bit to get the last few mm of the bearing off.
Bearing removed, I needed to add a longer socket/bit to get the last few mm of the bearing off.
0 2024/10/01 00:12:11
Screws circled in yellow.
Screws circled in yellow.
0 2024/10/01 00:24:01
All parts cleaned up. New replacement parts also shown.
All parts cleaned up. New replacement parts also shown.
0 2024/10/01 00:26:42
Inside view of inner and outer casing.
Inside view of inner and outer casing.
0 2024/10/01 00:26:55