MY350Z.COM - Nissan 350Z and 370Z Forum Discussion
0 2017/08/06 13:13:50
All was going good tell this happened. I was drilling the bracket and by backing piece of aluminum slipped and i puched a hole through 2 of the cores. Sucks.
All was going good tell this happened. I was drilling the bracket and by backing piece of aluminum slipped and i puched a hole through 2 of the cores. Sucks.
0 2017/08/06 13:17:55
So i cut off the bad portion and welded up the core. So with the extra room there i will make a oil catch can in that space.
So i cut off the bad portion and welded up the core. So with the extra room there i will make a oil catch can in that space.
0 2017/08/06 13:20:02
I had to cut up the rad support to make toom but it all fits tight now
I had to cut up the rad support to make toom but it all fits tight now
0 2017/08/06 13:22:22
0 2017/08/06 13:22:35
Heres the cut up rad support
Heres the cut up rad support
0 2017/08/06 13:22:47
0 2017/08/06 13:23:00
My old 2j car a e36
My old 2j car a e36
0 2017/08/07 16:14:12
0 2017/08/07 16:20:55
0 2017/08/07 16:26:11
Cuting off the feed and return and putting on an20 fittings and making it a duel pass rad
Cuting off the feed and return and putting on an20 fittings and making it a duel pass rad
0 2017/08/11 16:03:24
0 2017/08/11 16:04:45
0 2017/08/11 16:04:59
0 2017/08/11 16:05:13
0 2017/08/11 16:05:25
0 2017/08/11 16:05:37
0 2017/08/11 16:05:50
0 2017/08/11 16:06:02
0 2017/08/13 14:45:30
0 2017/08/13 14:46:05
0 2017/08/13 14:46:18
Took a few hours off from working on the car on my off time to make a shelf to free up so room
Took a few hours off from working on the car on my off time to make a shelf to free up so room
0 2017/08/18 19:33:51
0 2017/08/18 19:34:09
0 2017/08/18 19:34:21
0 2017/08/18 19:34:35
0 2017/08/18 19:34:48
0 2017/08/18 19:35:10
I all so put the wideband in the oem volt gauge pod idk if i like it but iam not a aftermarket pod kind of guy
I all so put the wideband in the oem volt gauge pod idk if i like it but iam not a aftermarket pod kind of guy
0 2017/08/18 19:36:41
I still have to get a new oil pressure gauge to replace the oem one.
I still have to get a new oil pressure gauge to replace the oem one.
0 2017/08/18 19:37:21
0 2017/08/25 14:05:30
0 2017/08/25 14:05:52
0 2017/08/25 14:06:05
Mocked up the cetch can. I still have to weld on the fittings and the drain bung
Mocked up the cetch can. I still have to weld on the fittings and the drain bung
0 2017/08/25 14:06:17
Cjm parts to convert it to return style fs
Cjm parts to convert it to return style fs
0 2017/09/01 16:28:14
0 2017/09/01 16:28:48
Installing nut surts
Installing nut surts
0 2017/09/01 16:29:19
0 2017/09/01 16:30:12
Mounted now to paint it
Mounted now to paint it
0 2017/09/01 16:32:16
Got a few things media blasted and painted
Got a few things media blasted and painted
0 2017/09/04 13:56:06
0 2017/09/04 13:56:28