MY350Z.COM - Nissan 350Z and 370Z Forum Discussion
I had to cut up the rad support to make toom but it all fits tight now
I had to cut up the rad support to make toom but it all fits tight now
0 2017/08/06 13:22:22
So i cut off the bad portion and welded up the core. So with the extra room there i will make a oil catch can in that space.
So i cut off the bad portion and welded up the core. So with the extra room there i will make a oil catch can in that space.
0 2017/08/06 13:20:02
All was going good tell this happened. I was drilling the bracket and by backing piece of aluminum slipped and i puched a hole through 2 of the cores. Sucks.
All was going good tell this happened. I was drilling the bracket and by backing piece of aluminum slipped and i puched a hole through 2 of the cores. Sucks.
0 2017/08/06 13:17:55
0 2017/08/06 13:13:50
0 2017/08/06 13:13:17
0 2017/08/06 13:11:26
Monting the ac condenser to the radiator
Monting the ac condenser to the radiator
0 2017/08/06 13:10:07
Checking for leaks . It hold just a tad over 3 gallons. And this is the cell for the large injectors 2200cc that will only be on during boost and they will be using e85
Checking for leaks . It hold just a tad over 3 gallons. And this is the cell for the large injectors 2200cc that will only be on during boost and they will be using e85
0 2017/08/03 18:31:26
Testfitting the cell
Testfitting the cell
0 2017/08/03 18:30:29
My shitty aluminum welds.
My shitty aluminum welds.
0 2017/08/03 18:29:34
The huge fuel pump and pre filter
The huge fuel pump and pre filter
0 2017/08/03 18:28:14
0 2017/08/03 18:27:23
0 2017/08/03 18:26:36
Makeing som templates to make the fuel cell that will go in the oem battery location
Makeing som templates to make the fuel cell that will go in the oem battery location
0 2017/08/03 18:24:30
0 2017/07/31 18:07:12
0 2017/07/31 18:06:24
0 2017/07/31 18:03:55
0 2017/07/31 18:03:10
0 2017/07/31 18:02:06
0 2017/07/31 18:01:08
0 2017/07/31 17:59:52
0 2017/07/31 17:58:58
.
.
0 2017/07/25 17:36:07
0 2017/07/25 17:35:19
Tac
Tac
0 2017/07/25 17:34:25
Test fitting the tac
Test fitting the tac
0 2017/07/25 17:33:32
Cuting out the oem tac
Cuting out the oem tac
0 2017/07/25 17:32:31
Welded on the wastegate flange
Welded on the wastegate flange
0 2017/07/25 16:44:25
The mounts done and mounted just have to paint them
The mounts done and mounted just have to paint them
0 2017/07/25 16:42:21
Bc vvti 272 cams.
Bc vvti 272 cams.
0 2017/07/25 16:40:59
Welding up the mounts
Welding up the mounts
0 2017/07/25 16:38:44
Test fitting with mainfold and turbo
Test fitting with mainfold and turbo
0 2017/07/25 16:37:37
Testfitting the motor
Testfitting the motor
0 2017/07/25 16:36:28
0 2017/07/25 16:35:35
The maverick motorsports jz/vq twin plate clutch
The maverick motorsports jz/vq twin plate clutch
0 2017/07/25 16:33:16
Thw greddy intake welded to the stock runners with a custom 12 injector setup for staged injectors
Thw greddy intake welded to the stock runners with a custom 12 injector setup for staged injectors
0 2017/07/25 16:31:28
2j with the new bw369sxe turbo
2j with the new bw369sxe turbo
0 2017/07/25 16:27:46
The gte vvti
The gte vvti
0 2017/07/25 16:26:52
Saying goodbye to the vq
Saying goodbye to the vq
0 2017/07/25 16:23:35
0 2017/07/25 16:22:46