mr. sparco

iTrader: (13)

Thanksgivings a cometh.

terrasmak

iTrader: (8)

Just order the SPC version , plenty of local places can get them for you.

SoCali-Z

I ended up getting the Eibachs (by spc).

How do I get the bolt out of the frame? It gets blocked by the torsion bar.
Please dont tell me I need to take the torsion bar off

terrasmak

iTrader: (8)

We don't have torsion bars, that is your sway bar. Yes you have to remove the 4 mounting bolts for the sway bar to get the camber arm out.

I know your in SoCal, hit up Corner 3 or Fontana Nissan for SPC arms, both should have them in stock.

SoCali-Z

Thats what I meant... Haha working on ford trucks too much. I cant believe I put torsion bar. 100% in my head was thinking sway bar.

I ended up getting it local at a speedshop. I appreciate all the help guys.

dcains

iTrader: (15)

Well, it is in fact a torsion bar, that functions as a sway bar. A torsion bar is a spring which hasn't been shaped into a coil.

RyankPeck

iTrader: (1)

The fact that the wheel is toe'd outward means it's the camber arm. Unless you have an aftermarket lower control arm, then it could be that but from what I can see it looks like you have oem struts so it has to be camber arm.
Very easy fix, just a couple bolts. You'll need an alignment after you swap it though