You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
About a month or so ago, we posted a picture of the new 20-Inch SSR MS-1 wheels on a silver/gray 370Z. The fitment on the car was pretty decent. But I KNOW that a lot of you would have liked to see a more aggressive fitment. And so, per your collective request, we bring you the following:
saw a black 370z in a Kroger parking lot today... i couldnt stop staring at it. its a beautiful car. love the wheels. i want some professors in black chrome.
Wow that look's really good.I think i'm going to have to stock some at the shop! Feel free to shop by the check them out in our show room
thanks Nat+James ! your the man!
Aww, after all that hard work testing fitments on this brand new car, I'm not gonna just spill the beans for all the other wheel manufacturers to see
If you want the specs, PM me or contact one of the SSR Dealers
All i can say publicly, is that the fronts are 20x9.5 and the rears are 20x11.
Give me a break...offsets are not trade secrets that need to be guarded. This is an enthusiasts site and we like to discuss things like sizes and offsets when dreaming or planning for our next car/set of of wheels. You might want to consider participating in that conversation if you want to gain a following in the community.
––––––––––––––––––––––––––––––––––––––––––––
For everyone else, I did 5 minutes of research and found a perfectly flush looking set of 20" Volk G2s with the following specs:
20x10 +30 front 255/30/20
20x11 +15 rear 295/25/20
So pretty easy to figure out a 20x9.5 would need an extra 6mm or so of backspacing. Someone hurry up and quote me before SSR decides to contact IB and get my "secret offsets" post removed!
Give me a break...offsets are not trade secrets that need to be guarded. This is an enthusiasts site and we like to discuss things like sizes and offsets when dreaming or planning for our next car/set of of wheels. You might want to consider participating in that conversation if you want to gain a following in the community.
末末末末末末末末末末末末末末末末末末末末末末
For everyone else, I did 5 minutes of research and found a perfectly flush looking set of 20" Volk G2s with the following specs:
20x10 +30 front 255/30/20
20x11 +15 rear 295/25/20
So pretty easy to figure out a 20x9.5 would need an extra 6mm or so of backspacing. Someone hurry up and quote me before SSR decides to contact IB and get my "secret offsets" post removed!
I would try contacting VIP Status since IT IS their car. So maybe try to contact them to get the info?
SSR MS-1 370Z Aggressive Fitment Photoshoot
