|
OK, one last thing to do before we remove the battery. This step is important. You won't be able to wedge the battery out of the cubby hole unless you perform this step. We have to pry up on the black plastic panel that sits at the base of the windshield. All you have to do is remove 2 snap rivets. Once you remove the rivets you can see how much I was able to pry the panel up without actually removing it. This gives you an additional 2 inches to work with, which is all you need.
In the last 2 pictures you'll notice I wedge a screwdriver handle under the panel. This is to create the 2 inch gap you'll need to get the battery out, and not have to worry about prying the panel up while you're pulling the battery out.
After all this is done, just slide the battery to the right and pull it out.
__________________
Team Nextstage
Sponsored by Meguiar's
www.teamnextstage.com
Team DNF n00bslayer & eater of children............................................................ ...............
|