American Plastic Tech: US Made poly! Intro SALE inside
#21
Vendor - Former Vendor
Thread Starter
We do our best to base our pricing on customer's feedback and response. I think the V2 we offer is very competitively priced, as will the next few bumpers we have lined up for the 350Z.
#22
Vendor - Former Vendor
Thread Starter
Bump 59 minutes left in the sale! Thanks for the warm welcome guys!
The following users liked this post:
APTech (11-09-2015)
#27
Vendor - Former Vendor
Thread Starter
Sorry guys, was away at SEMA.
@venture, I'll send you a pm right now.
@Mr. Sparco, our last project too a bit longer than expected, however I do have a Z in for fitting as we speak.
Polyurethane shrinks so we have to cut/trim/fit the bumper we are using as a base, then cut it into approx 8 different pieces, widen it, put it back together, get it practically paint ready to ensure a smooth mold, make the mold, make the part, test-fit, and THEN sell. lol. I expect a sell-able part before the end of the month and trust me, it'll be worth the wait.
@venture, I'll send you a pm right now.
@Mr. Sparco, our last project too a bit longer than expected, however I do have a Z in for fitting as we speak.
Polyurethane shrinks so we have to cut/trim/fit the bumper we are using as a base, then cut it into approx 8 different pieces, widen it, put it back together, get it practically paint ready to ensure a smooth mold, make the mold, make the part, test-fit, and THEN sell. lol. I expect a sell-able part before the end of the month and trust me, it'll be worth the wait.
Last edited by APTech; 11-09-2015 at 02:38 PM.
#28
Vendor - Former Vendor
Thread Starter
#29
Registered User
iTrader: (6)
Hello APTech,
I'm looking for a polyurethane Nismo V2 bumper to replace my FRP one from Shine and have been researching to find a reputable vendor and manufacturer. I have found numerous instances of people who have had bad experiences with getting a quality piece that doesn't require extensive body work to fit and one that is lightweight. I have not been able to find anyone on the forum that has purchased and installed one of your bumpers to ask their opinion on fitment. I am hesitant to purchase due to post #14 from Heritage who claims that the bumper looks identical to one that required 10+ hours of major work to install.
Do you have any customer testimonials to support your product or referrals that I may reach out to?
Do you have a reference of a reputable body shop that has installed one of your poly bumpers that would be available to comment on it?
Do you offer a refund on the product if it does not meet your description?
I'm looking for a polyurethane Nismo V2 bumper to replace my FRP one from Shine and have been researching to find a reputable vendor and manufacturer. I have found numerous instances of people who have had bad experiences with getting a quality piece that doesn't require extensive body work to fit and one that is lightweight. I have not been able to find anyone on the forum that has purchased and installed one of your bumpers to ask their opinion on fitment. I am hesitant to purchase due to post #14 from Heritage who claims that the bumper looks identical to one that required 10+ hours of major work to install.
Do you have any customer testimonials to support your product or referrals that I may reach out to?
Do you have a reference of a reputable body shop that has installed one of your poly bumpers that would be available to comment on it?
Do you offer a refund on the product if it does not meet your description?
#30
Vendor - Former Vendor
Thread Starter
Hi P0tential,
To answer your questions:
I wouldn't be able to provide you with referrals for multiple reasons, however you can find our vendors selling on EBay with multiple positive feedback reviews on our products.
Most of our business is wholesale, so we don't often get to talk to the end users/shops (one of the reasons we're on here is to help answer any questions you may have before buying from one of our distritbutors or ourselves). Also, many of our customers don't necessarily say "Yes, this is an APT product". A lot of our customers will install our parts, put NISMO decals on them, and just call it a Nismo bumper, and we're okay with that.
We do have a Limited Lifetime Warranty, which does cover fitment due to manufacturer defect.
I do have these images though, hopefully you find them helpful:
One of the few finished and painted pics i've gotten lol.
Hope those help!
To answer your questions:
I wouldn't be able to provide you with referrals for multiple reasons, however you can find our vendors selling on EBay with multiple positive feedback reviews on our products.
Most of our business is wholesale, so we don't often get to talk to the end users/shops (one of the reasons we're on here is to help answer any questions you may have before buying from one of our distritbutors or ourselves). Also, many of our customers don't necessarily say "Yes, this is an APT product". A lot of our customers will install our parts, put NISMO decals on them, and just call it a Nismo bumper, and we're okay with that.
We do have a Limited Lifetime Warranty, which does cover fitment due to manufacturer defect.
I do have these images though, hopefully you find them helpful:
One of the few finished and painted pics i've gotten lol.
Hope those help!
#33
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
I think I know where my next bumper is coming from
#36
Vendor - Former Vendor
Thread Starter
All PM's replied. Thanks!
#40
Vendor - Former Vendor
Thread Starter