FS: DE Brian Crower 4.2 Balanced Stroker Kit (NEW)
11-08-2014, 07:13 PM
#1
Registered User
Thread Starter
DE Brian Crower 4.2 Balanced Stroker Kit (NEW)
I am selling my BC 4.2 stroker kit for the DE motor.
Condition: Brand New in the box
The BC stroker kit for the Nissan VQ35DE engine platform incorporates a 86.4mm stroke, steel billet crank, BC 4340 Pro Series Billet rods rated to 1200+ horsepower.
Custom set of Carrillo Aluminum Forged Pistons 8.5:1 CR 100mm and I included the full spec sheet!
9310 alloy wrist pins.
Ring pack and buttons.
Can use any cam you see fit, I was going with either 288 or Tomei ProCam.
1000+whp kit!
Also I have a brand new set of ARP Head studs to go with the package!
Fully system balanced and ready to install!
Price $5100.00
Willing to ship!!!!! Kit is Located in Southwest Florida!!!
*Contact* (239)878-6252 cell Text anytime! Email: nosprowler@gmail.com both are best ways to reach me!
If I get a good offer I will part with my kit if not my 2JZ build would just take a little longer than expected and I could save this for when my DDZ does
Condition: Brand New in the box
The BC stroker kit for the Nissan VQ35DE engine platform incorporates a 86.4mm stroke, steel billet crank, BC 4340 Pro Series Billet rods rated to 1200+ horsepower.
Custom set of Carrillo Aluminum Forged Pistons 8.5:1 CR 100mm and I included the full spec sheet!
9310 alloy wrist pins.
Ring pack and buttons.
Can use any cam you see fit, I was going with either 288 or Tomei ProCam.
1000+whp kit!
Also I have a brand new set of ARP Head studs to go with the package!
Fully system balanced and ready to install!
Price $5100.00
Willing to ship!!!!! Kit is Located in Southwest Florida!!!
*Contact* (239)878-6252 cell Text anytime! Email: nosprowler@gmail.com both are best ways to reach me!
If I get a good offer I will part with my kit if not my 2JZ build would just take a little longer than expected and I could save this for when my DDZ does
Last edited by nosprowler; 11-10-2014 at 05:02 AM.
11-09-2014, 03:12 PM
#3
Hello,
A few questions
1. I see the specs on the Pistions, but what CR Rating?
2. I see the Spec on the Valve pockets, but what Camshafts are they spec'ed for?
3. What P/n Kit is this, with Sportsman Rods or BC625's?
I'm in West Central Florida, where exactly are you?
Thanks,
TimRod
A few questions
1. I see the specs on the Pistions, but what CR Rating?
2. I see the Spec on the Valve pockets, but what Camshafts are they spec'ed for?
3. What P/n Kit is this, with Sportsman Rods or BC625's?
I'm in West Central Florida, where exactly are you?
Thanks,
TimRod
11-10-2014, 05:06 AM
#5
Registered User
Thread Starter
Thanks @qew she is a beauty. Sometimes I just like looking at it. My girl is like you have problems, I say she stares at shoes and purses, I stare at parts lol!
Pm'd sent! And I also Updated the Post! Thanks those were great questions!
Damien.
Hello,
A few questions
1. I see the specs on the Pistions, but what CR Rating?
2. I see the Spec on the Valve pockets, but what Camshafts are they spec'ed for?
3. What P/n Kit is this, with Sportsman Rods or BC625's?
I'm in West Central Florida, where exactly are you?
Thanks,
TimRod
A few questions
1. I see the specs on the Pistions, but what CR Rating?
2. I see the Spec on the Valve pockets, but what Camshafts are they spec'ed for?
3. What P/n Kit is this, with Sportsman Rods or BC625's?
I'm in West Central Florida, where exactly are you?
Thanks,
TimRod
Damien.
Last edited by SR71; 11-10-2014 at 07:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
