Jzurita's Build "Nightmare that became a dream" 590whp 93 octane
09-12-2009, 12:19 PM
#81
Registered User
I hope that was just to make power on the dyno....
If it was being driven on the street like that on pure 93 octane you surely would be asking for trouble....those injectors must have been in the high 90% duty cycle...no telling what they were really flowing up at those levels. And I wonder what the fuel pressue looked like.
Tom
If it was being driven on the street like that on pure 93 octane you surely would be asking for trouble....those injectors must have been in the high 90% duty cycle...no telling what they were really flowing up at those levels. And I wonder what the fuel pressue looked like.
Tom
It does seem like an aweful lot of power for 600cc injectors. But that may have been achieved just for show. I am running 800cc injectors and running out of fuel but I have the AAM stage 2 auxillary pump to support the in-tank walbro. Your Walbro was working very hard to keep up for that power level.
But perhaps you were running on a lower map setting. The UTEC is very convenient in that you can change fuel/tune maps relatively easy if you have a map selector.
Any input on that John?
But perhaps you were running on a lower map setting. The UTEC is very convenient in that you can change fuel/tune maps relatively easy if you have a map selector.
Any input on that John?
09-12-2009, 05:56 PM
#82
Sorry to hear of this J, believe me when I say that I know how you feel. Hopefullt teardown will reveal a difinitive cause, but it is oil starvation it will be difficult. I hope you did not lose everything as I have, best of luck and I'm in for results.
09-20-2009, 08:48 PM
#88
Registered User
iTrader: (5)
Join Date: Feb 2008
Location: Poughkeepsie, NY
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
Haha, i had to climb out the window , then we look down at the fenders and there are rubber releases and hinges, undo two little rubber locks and the fender on the trailer swings right out of the way. It was dukes of hazard until we saw that.
09-20-2009, 09:50 PM
#89
Banned
Join Date: Jun 2007
Location: under the hood
Posts: 1,342
Likes: 0
Received 0 Likes
on
0 Posts
something to consider......
2006
Engine
Nissan 350Z like new 24,510k $400 core 24,510 A DC129 $1500 General Auto Recycling USA-RI(Tiverton) Request_Quote 1-800-556-7316
2006
Engine
Nissan 350Z like new 24,510k $400 core 24,510 A DC129 $1500 General Auto Recycling USA-RI(Tiverton) Request_Quote 1-800-556-7316
09-21-2009, 03:56 AM
#90
Pics and posts tonight are a must! I don't have the know how of some of the more experienced tech guys on here, but I know what busted up VQ's look like and what to look for now.
09-21-2009, 09:29 AM
#95
Dropped the car off at VTR this morning. Up since 5am and just set foot in the office. Traffic was an F'ing b!tch!
They are going to start working on it asap and record vids of the entire process. If necessary, it looks like the official block disassembly will be this Saturday.
They are going to start working on it asap and record vids of the entire process. If necessary, it looks like the official block disassembly will be this Saturday.
Last edited by JZurita; 09-21-2009 at 09:49 AM.
