Acpt Carbon Drive Shaft
#1
Registered User
Thread Starter
iTrader: (2)
Join Date: Mar 2005
Location: california
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Acpt Carbon Drive Shaft
hey how many of you would be interested in a carbon drive shaft.i know we already have one stock but im really good friends with one of the disigners over at acpt and hey said he could not only make it stronger but about 6-8 pounds lighter atleast.
#5
Registered User
iTrader: (4)
Join Date: Sep 2002
Location: Who wants a dyno?
Posts: 1,779
Likes: 0
Received 0 Likes
on
0 Posts
Not worth it.
Stock driveshafts are proving to hold 700+hp. There is no market for this right now unless your shooting for the 900+hp market, which doesn't exist at this time.
There might be a limited market for racers who are looking to shave that last bit of rotating inertia, but once again this is a market that is every small to non-existant.
Stock driveshafts are proving to hold 700+hp. There is no market for this right now unless your shooting for the 900+hp market, which doesn't exist at this time.
There might be a limited market for racers who are looking to shave that last bit of rotating inertia, but once again this is a market that is every small to non-existant.
Trending Topics
#9
Boost Junkie
iTrader: (3)
I have an ACPT carbon drive shaft on my 2003 G35 coupe - it was the first one they made per my request. The fitment was perfect first time out, and I don't have a single issue, no virations, perfect alignment, etc...
It made a big difference in my car, becuase the G doesn't come with a carbon shaft like the 350Z does.
It made a big difference in my car, becuase the G doesn't come with a carbon shaft like the 350Z does.
#15
Registered User
iTrader: (4)
Join Date: Jan 2005
Location: so cal
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Our DSport R33 GTR making 900+ has an ACPT Driveshaft and that thing is badass. This probably wouldn't benifit the 350Z crowd because yours come stock CF but the high horsepower G35 crowd should definitely look into this.
Philthy - what was the turn around time once you got the driveshaft to ACPT?
Philthy - what was the turn around time once you got the driveshaft to ACPT?
#18
Boost Junkie
iTrader: (3)
Prices will differ based on your specs - figure between 1-2k. I sent ACPT my stock driver shaft because it was the first G35 drive shaft that they did...
The process took about two months, but now that they've done it already and they have all of the data, it should be much quicker.
The process took about two months, but now that they've done it already and they have all of the data, it should be much quicker.