info here in this thread https://my350z.com/forum/showthread....hreadid=100229

 

some pics

 

that is nice... is it for sale?

 

Of course. $185.00 per set. But there is a sale right now till the end of the year. $165.00 for the set. That is the mirrors and the rear emblem filler for $165.00.

 

looks good rich!

 

payment sent!

Thanks,
Dave Capone

DaveC@LISupras.com

 

how to install that thing? please post some instructions and pictures would be better

 

Wow, your price has gone up quite a bit since last year.

 

???last year??? We just finished designing them! Last week!

They are peel and stick, and a bit more complex to make and install than the Z's. More dry fitting needed to assure good alignment. Make sure it is warm where you do this. Adhesive is acrylic which loses ability to initiate bond below 70 deg F.

 

did you get it?

 

Sorry, I was refering to the Z's. I remember getting the B-pillers and the 3 piece mirrors for my Z for like $125.00 for all. I thought the G mirrors are the same as the Zs. Anyways, didn't mean to offend you or anything.

 

uhhh.stick-ons for 165?i thought it was a complete swap out.


thats way too much!!get batmobile to make them.

 

85 bucks here.

http://g35driver.com/forums/showthread.php?t=37113

 

what are you talking about?
Anyway mine are in production, fairly priced, and fit like a glove. Swapped out parts would be hella bigger bucks my friend.

YEah get Bat to make them. Bat's stuff is vinyl. Mine are real.

 

that link above has the same stuff you are selling. real carbon with 3m double sided tape. 85 dollars though.

 

Don't want to sound troublesome, but I followed the link you supplied, read it through looking for picturs of the pieces you are talking about. Found nothing but dead links. The $18.00 pieces are probably Bat's overlays. The other guy soliciting for a 'maybe' deal has no product to show. I am befuddled and confused by your post. Again. We have them. They are a two piece set for each mirror. It covers the black area. A little more difficult to make than the 350Z as tolerances are tighter. Have to be. Because of the way it fits, it looks like a molded mirror housing. Notice I said 'looks'.

The $85.00 set is NOT the same as what we are selling. We make what we are selling. Nobody else has them. We do not distibute these to anybody yet. They are only available here. Through us. Sure maybe somebody will trace out ours and copy them. And offer them cheaper. Who knows? Not like it never happened to us before.

 

I just got them in, they look awesome!

Do you have any tips on proper installation? I take it you clean the area off with alcohol, apply the primer (do you let the primer completely dry?), peel off the 3m tape backing, and then stick to the surface?

 

Things few people know. The 3M tape bonds in a mechanical way. The acrylic will not gain adhesion upone initial tack at temps BELOW 65 deg F. It may seem to stick, but will fall off somewhere down the road. Laymens terms, make sure the parts that are going to mate are warm and about the same temp. Getting the CF warmed to about 85 deg F will help it conform and stick to curves. Dry fit the pieces to memorize moves so it all mates up nicely. The alcohol pads are to remove dirt and silicones. The adhesion promoter MAY be used. If applied, make the contact within 20 minutes but after 5 minutes. And post some pics! Glad your are happy!

 

I'll use a heat gun on everything since its like 30 degress here!

 

Pinnacle -

Do you have any additional photos? I'd like to see what the gunmetal looks like and the chrome. Also, do you have a picture that is not such a close up as what you posted here?

Thanks,
Prolix