FS: Vortech V3 tuner kit for rev up engine
05-08-2013, 05:02 PM
#1
Registered User
Thread Starter
iTrader: (6)
Join Date: Jul 2010
Location: canada
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Vortech V3 tuner kit for rev up engine
I have for sale a Vortech V3 tuner kit for the rev up engine. The kit has two years of use by me and one year of use from the previous owner. There is some scratches on the pipes and the silicone couplings reflect that this kit has been installed twice. Having said that, the kit is functional and was pulled off my car making 10-11psi and 413 rwhp. The smaller pulley has already been sold, so the stock 3.12 pulley is what is included in this sale.
As the new owner of this kit you may consider rebuilding the sc bearings. It doesn't need that yet imo but it is much easier to do while the sc is off the engine. Also I live in Canada, so there is the potential of paying some amount of tax at the border. Considering those two things, I am willing to price this kit as fairly as possible, so let me know if you are interested.
Vortech v3 tuner kit includes the supercharger, mounting bracket, mounting hardware, intercooler, bypass valve, intake piping. I also have an extra cog belt, serpentine belt, and a lot of vortech oil (7 oil changes worth) which will be included.
SOLD
Thanks for looking!
As the new owner of this kit you may consider rebuilding the sc bearings. It doesn't need that yet imo but it is much easier to do while the sc is off the engine. Also I live in Canada, so there is the potential of paying some amount of tax at the border. Considering those two things, I am willing to price this kit as fairly as possible, so let me know if you are interested.
Vortech v3 tuner kit includes the supercharger, mounting bracket, mounting hardware, intercooler, bypass valve, intake piping. I also have an extra cog belt, serpentine belt, and a lot of vortech oil (7 oil changes worth) which will be included.
SOLD
Thanks for looking!
Last edited by jamestown; 05-24-2013 at 01:36 PM.
05-15-2013, 08:32 PM
#4
Registered User
Would you take a trade ... 92 300zx 5spd stage 2 mtr headders 440 venom fuel injectors msd ignition nisimo duals and intake auto start alarm and 7" touch screen and I have agtz front bumper to go with it
05-16-2013, 03:54 PM
#7
Registered User
Thread Starter
iTrader: (6)
Join Date: Jul 2010
Location: canada
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
To run this kit, as it is the tuner kit, at a minimum you will need fuel system upgrades (bigger injectors and a fuel pump) and engine management (I used uprev flash with a custom tune). With the stock pulley assuming you have no other power mods (plenum, exhaust, cams etc) you will make roughly 50% more power than stock. I made 337 rwhp with just a motordyne lower plenum/spacer on stock cats/exhaust.
The vortech faq in the FI section is a wealth of information on this kit. You may want to check it out for more info on supporting mods and what results to expect if you are considering it.
The vortech faq in the FI section is a wealth of information on this kit. You may want to check it out for more info on supporting mods and what results to expect if you are considering it.
Last edited by jamestown; 05-16-2013 at 04:00 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
seagrasser
Zs & Gs For Sale
6
10-11-2015 03:27 PM
